White Coaxial Cable
White coaxial cable is a round cable with a central conductor and an outer shield, used for analogue CCTV cameras and other coax connections. It is white in colour and suits indoor wiring in homes, shops and offices in Kenya. Ask our team to confirm type and length.
- White round coaxial cable
- For analogue CCTV and other coax links
- Easy to see and tidy on walls
- Cut to length and fit connectors
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
White coaxial cable is a round cable built around a central conductor with a shield around it. It is the traditional cable for analogue CCTV cameras, where one cable carries the video from camera to recorder. The white jacket is easy to see against walls and ceilings in Nairobi homes and shops.
What coaxial cable is used for
- Analogue and HD analogue CCTV cameras connected to a DVR using BNC connectors.
- Other coax links where the equipment calls for it, so check the connector type first.
Network cameras use network cable instead, so do not use coax for an IP camera unless you have a specific adapter made for that purpose.
Choosing the right run
Plan the route from each camera to the recorder before you buy. Measure the real path along walls and ceilings, not a straight line, and add some spare for the connector ends. Keep the cable away from mains wiring where possible, because running video cable alongside power can pick up interference.
Cable type matters, and not every coax is the same. The exact type, such as the thickness and impedance, must match your connectors and equipment. This stock cable is sold as white coaxial cable, so ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi to confirm the type and length before you start a job.
Fitting and installation
- Cut the cable to length and strip it back carefully so the shield does not touch the centre conductor.
- Fit connectors suited to the cable, such as BNC for a CCTV camera, using the correct tool.
- Test each run before closing up conduit or ceiling.
- Fix the cable with clips and avoid sharp bends.
Kefa Solutions technicians can install CCTV cameras if you would rather not do the cabling yourself.
What to buy with it
Connectors, a power supply for each camera or a power cable, clips or conduit, and a recorder. Ask our team for the exact specification of the unit in stock.
Frequently asked questions
Can I use coaxial cable for an IP camera?
No. IP cameras connect over network cable, normally Cat5e or Cat6 with RJ45 plugs. Coaxial cable is for analogue or HD analogue cameras that connect to a DVR using BNC connectors. If you are unsure which system you have, bring the camera or ask our team before buying cable.
How do I know how much cable I need?
Measure the actual route from each camera to the recorder, following walls and ceilings, then add extra for the ends and for mistakes. Longer runs should be planned carefully, because the cable type and length affect picture quality. Ask our team to confirm the length available and the type in stock.
What connectors go on this cable?
For CCTV, coaxial cable is normally fitted with BNC connectors, though the right size depends on the cable type. Confirm the cable type with our team before you buy connectors so they match properly. Always test the run before you fix the cable in place.

