

12V 5A Closed Switching Power Supply S-60-12
The S-60-12 is a compact closed-case switching power supply rated at 12 V DC and 5 A, about 60 W. It is the right size for small CCTV setups in Kenyan homes and shops, typically a handful of cameras, and replaces a cluster of separate plug adaptors with one tidy supply in the cabinet.
- 12 V DC output at up to 5 A
- About 60 W total capacity
- Compact size for small wall cabinets
- Suits small home and shop CCTV systems
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The S-60-12 is a 12v 5a power supply of the closed-case switching type. It turns mains power into 12 V DC on a screw terminal strip, and is sized for small systems where a 10 A or 20 A supply would be more than you need.
Why choose 5 A
Five amps at 12 V is about 60 W, which is where the 60 in S-60-12 comes from. That covers a small CCTV kit of a few cameras, with spare capacity for their infrared lights at night, as long as you check the current on each camera label and keep the total comfortably below 5 A. For example, four cameras rated at 0.5 A each draw 2 A in total. Because it is small, it fits easily into a compact wall cabinet next to a 4-channel or 8-channel recorder.
- 12 V DC output, up to 5 A.
- About 60 W in total.
- Compact closed casing with screw terminals.
- Model code S-60-12.
Where to use it
It suits a home with cameras at the gate, door and parking, a single shop or kiosk, a small office, or a rental unit. Outside CCTV, it can run a short length of 12 V LED strip lighting, a 12 V router or other small 12 V loads, provided the plugs and polarity match. If you would rather have several ready-made outputs in an enclosure, a 9-channel CCTV power supply box at 12 V 5 A is the boxed alternative.
Installation and setup
Fix the supply indoors, in a dry and ventilated spot, ideally inside the same cabinet as the recorder. Never leave it exposed outdoors. With the mains off, wire live, neutral and earth to the input terminals, then take 12 V to the cameras through a small fused terminal block or individual inline fuses. Check that any 110/220 V selector is set to 220 V before connecting to Kenyan mains. Measure the output with a multimeter before connecting the cameras, and double-check polarity on every DC plug. Kefa Solutions technicians can install complete CCTV systems if you prefer.
What you need with it
- Power cable or combined video and power cable.
- DC jacks or pigtails for each camera.
- A small cabinet and a fused mains connection.
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order delivery within Nairobi or by courier across Kenya.
Frequently asked questions
Is a 12V 5A supply enough for a 4-camera kit?
Often it is, but check rather than assume. Read the current rating on each camera, use the figure with night illumination on, and add them up. If the total stays well below 5 A, this supply is suitable. If it comes close to 5 A, choose the 10 A S-120-12 instead.
Is this better than using separate adaptors for each camera?
A single central supply keeps the wiring tidy, sits in one cabinet and is easier to back up or replace. Separate adaptors spread the risk, because one failing adaptor only stops one camera. With a central supply, add a fuse for each camera so one fault does not stop all of them.
Can I run a 12V router from this power supply?
Yes, if the router is rated for 12 V DC and its total current, together with anything else on the supply, stays within 5 A. You will need the correct DC plug and must connect positive and negative the right way round, because reversed polarity can damage the router.