SKU KCS-CAT6-UTP-POWER

Cat6 UTP Cable with Power Cores

KSh 70 per metre
In stock — pick up today in Nairobi CBD

This is Cat6 UTP network cable made with extra power cores alongside the data pairs. It lets you run network data and a separate low-voltage power feed to a camera or device in a single cable pull, which can save time on long Kenyan installs.

  • Cat6 UTP twisted pairs for network data
  • Power cores in the same cable
  • One cable pull for data and power
  • Handy where no power point is nearby
How our CCTV installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 4 items KSh 4,520
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

Cat6 UTP cable with power is a combined cable: Cat6 unshielded twisted pairs for network data, plus extra conductors for carrying power. The idea is to run one cable to a camera or device instead of pulling a network cable and a separate power cable.

What the parts do

UTP means unshielded twisted pair. The twisted pairs carry Ethernet data. The power cores sit alongside them and carry a separate low-voltage supply from a power source near the recorder to the device at the far end. This differs from PoE, where the power travels over the data pairs themselves.

Key features

  • Cat6 unshielded twisted pairs for data
  • Additional power cores in the same cable
  • One cable pull to a camera for data and power
  • Useful where a separate power cable would be awkward

Where to use it in Kenya

It suits camera runs along walls and ceilings in shops, schools and compounds in Nairobi where the camera has no mains socket nearby and you do not want to build a separate power route. It is also handy where the camera needs a power supply that its network port cannot provide.

Installation and setup

Treat the data and power parts separately at each end. Terminate the data pairs with an RJ45 plug or keystone jack, and connect the power cores to the correct power supply and the device's power input, observing polarity. Check the voltage your device needs and keep the power feed fused or rated for the cable. Test the data link with a cable tester, and check the power at the far end with a multimeter before connecting the device.

What you need with it

  • RJ45 plugs or keystone jacks, and a crimp tool
  • A power supply that suits the device
  • Connectors for the power cores, such as a DC plug or terminal block
  • A cable tester and multimeter

Before you buy

Details such as the size of the power cores, whether the cable is rated for outdoor use, and how it is sold need confirming. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the cable in stock.

Frequently asked questions

Is this the same as PoE?

No. With PoE, power travels over the data pairs of an ordinary network cable. In this cable, the power travels on separate cores next to the data pairs. You connect the data and power parts separately at each end, using a suitable power supply.

What does UTP mean?

UTP stands for unshielded twisted pair. The pairs are twisted to reduce interference but are not wrapped in a foil or braid screen. It is common for indoor and general network cabling, while shielded cable is used where more protection from interference is needed.

Can I use it outdoors?

That depends on how the cable is made, and we need to check the unit in stock. Cable not made for outdoor use can be damaged by sun and rain over time. Please ask our Nairobi team before running it outside.

KSh 70 In stock