SKU KCS-FISH-TAPE

Steel Fish Tape for Pulling Cable

KSh 1,500
In stock — pick up today in Nairobi CBD

A steel fish tape, often just called a steel tape or draw tape, is pushed through conduit so you can pull cables in behind it. Electricians and CCTV installers in Kenya use it to run camera, network and power cables through conduit buried in block and concrete walls.

  • Pulls cable through conduit already built into walls
  • For CCTV, network and electrical cable runs
  • Stiff enough to push, flexible enough for bends
  • Saves cutting chases in finished plaster
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A steel fish tape is a long, flat, springy steel band that you feed into a conduit from one box until it comes out at the next. You then fix your cable to the end and pull it back through. Electricians across Kenya often call it a steel tape or draw tape. It is the standard way to get cable into conduit that is already built into a wall.

Why installers need one

Many homes and offices in Nairobi are built with PVC conduit cast into block walls and concrete slabs. Once the plaster is on, the only way to add a CCTV, network or extra power cable is through that conduit. Cable is too floppy to push more than a short distance, but a steel tape is stiff enough to be pushed along the pipe and flexible enough to follow gentle bends.

How to use it

  • Switch off and isolate any power circuits in the conduit before you start.
  • Feed the tape in from one box or opening, pushing in short strokes.
  • At a bend, ease off and turn the tape slightly so the tip finds its way round.
  • When the tip appears at the far box, strip the cable ends and fold them through the eye or hook of the tape.
  • Wrap the joint tightly with insulating tape so it is slim and smooth, with no edges to catch.
  • Pull steadily while a helper feeds the cable in at the other end without kinks.

Tips for difficult runs

Long runs with several bends are easier in stages: pull through to an intermediate box, then start again. If the tape stops, draw it back a little and try again, or come in from the other end. When pulling several cables together, stagger the stripped ends along the joint so it does not form a thick lump.

Safety

Steel conducts electricity. Never push a steel tape into a conduit or box with live wires in it, and take care not to scrape the insulation of existing cables already in the pipe. Wear gloves, because the edge of a steel band can cut, and wind the tape back carefully so it does not spring loose.

What you need with it

  • Insulating tape for securing the cable to the tape.
  • Cable pulling lubricant for long or crowded conduit runs.
  • Draw boxes or junction boxes at bends on new installations.
  • The cable itself, cut with a little extra length at each end.

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including its length.

Frequently asked questions

How do I attach the cable to a fish tape?

Strip a few centimetres of each cable, fold the conductors through the eye or hook at the tip of the tape, and twist them back on themselves. Then wrap the whole joint tightly with insulating tape, tapering it so there is no step that can catch on conduit joints. For several cables, stagger the ends so the joint stays slim.

Can I use a steel fish tape in conduit that already has cables in it?

Yes, as long as any power cables in that conduit are switched off and isolated first, because steel conducts electricity. Push gently so the tape does not scrape the insulation of the existing cables. A crowded conduit may not have room for more cable, so check the space before you start pulling.

Why does the tape get stuck halfway?

It is usually a tight bend, a badly made conduit joint or debris such as cement or sand inside the pipe. Pull back a little, turn the tape and push again in short strokes. If it still stops, try from the other end, or pull in stages through an intermediate box. Lubricant helps when the cable itself is the hard part.

Is steel better than a nylon or fibreglass draw rod?

Steel is stiffer, so it pushes further along straight conduit and through tighter spaces. Nylon and fibreglass rods do not conduct electricity, which makes them the safer choice near live wiring, and some installers prefer them for ceilings and open spaces. Many electricians in Kenya keep a steel tape for conduit work and a rod set for everything else.

KSh 1,500 In stock