
Cable Tracer
A cable tracer helps you find one cable among many and follow its route through walls, ceilings and trunking. It is a working tool for CCTV, network and alarm installers in Kenya, used to identify unlabelled cables at patch panels, recorders and switches without pulling or unplugging the wrong one.
- Finds one cable in a bundle without unplugging everything
- Tone transmitter at one end, handheld probe at the other
- For network, CCTV, phone and alarm cable runs
- Makes labelling patch panels and recorder inputs quick
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A cable tracer answers the question every installer meets on an older site: which of these cables goes where? Instead of pulling cables one by one, you send a signal down the cable you are looking for and pick it out of the bundle with a handheld probe. It saves hours in offices, shops, flats and schools across Kenya where cables were never labelled.
How a cable tracer works
A tracer has two parts. The transmitter, or tone generator, connects to one end of the cable and sends an audible tone along it. The probe is held against the cables at the other end, or along their route, and sounds loudest at the cable carrying the tone. You mark that cable and move on to the next one.
Jobs it helps with
- Matching network wall sockets to ports on an unlabelled patch panel or switch.
- Finding which cable at a DVR or NVR belongs to which camera when a site has many identical runs.
- Following a cable route above a ceiling or inside trunking before you drill or cut.
- Picking out the right pair in a multi-core phone or alarm cable.
Using it on site
Unplug the cable you are tracing from switches, recorders and cameras first, so the tone is not mixed with live signals or power on the line. Connect the transmitter at the easy-to-reach end, such as the wall socket or the camera position. Then go to the bundle and sweep the probe slowly across the cables, moving closer as the tone gets louder until one cable stands out. Label both ends straight away with a number or the room name.
Never connect the transmitter to a mains power circuit. Tracers are made for low-voltage data, phone and security cables.
Tracer or tester?
A tracer finds a cable. A cable tester checks that a finished cable is wired correctly from end to end. Most installers carry both: the tracer to find the run, then the tester after fitting new plugs.
What you need with it
- Cable labels or a permanent marker to record each run.
- A cable tester for checking terminations.
- A crimping tool and plugs if you re-terminate the cables you find.
- Spare batteries, so the tracer does not go flat halfway through a job.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including the leads it comes with. Collect it from our shop in Nairobi CBD, get delivery within Nairobi (up to 45 km), or order by courier anywhere in Kenya in 1 to 3 working days.
Frequently asked questions
What is the difference between a cable tracer and a cable tester?
A tracer finds a cable: it puts a tone on one end so you can pick the same cable out of a bundle at the other end. A tester checks the wiring of a cable that already has plugs fitted, showing broken, shorted or crossed wires. Installers usually need both, one to identify runs and one to prove the terminations.
Can a cable tracer find a cable inside a wall or ceiling?
Often, yes. The probe picks up the tone through a short distance of plaster, board or plastic trunking, so you can follow a cable along a wall or above a ceiling before drilling. Thick concrete and metal conduit weaken the signal, so on those routes trace from openings such as sockets, boxes and ceiling hatches instead.
Can I trace a cable that is still connected to a switch or camera?
Unplug it first. A live network port, PoE power or a running recorder on the line can mask the tone or interfere with the tracer, and the equipment at the far end does not need the extra signal. Disconnect the cable at both ends where you can, trace and label it, then plug everything back in.
Does a tracer work on CCTV coaxial and alarm cable?
Tone tracing works on copper conductors in general, so it can be used on coaxial, alarm and phone cable as well as network cable, as long as you can connect the transmitter to the conductors at one end. How you connect depends on the leads supplied with the tracer, so check them before you go to site.