
Electronic Contact Cleaner Spray 100 ml
A 100 ml can of electronic contact cleaner for cleaning dirt, dust and oxidation from connectors, switches and contacts. Technicians and DIY users in Kenya use it on CCTV plugs, BNC and RJ45 connectors, DC power jacks and remote controls when connections become unreliable.
- 100 ml contact cleaner spray
- Cleans dirt and oxidation from connectors
- For CCTV plugs, switches and controls
- Use with power off, in good ventilation
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A contact cleaner spray is a solvent made for cleaning the metal contacts inside electrical and electronic equipment. It loosens dirt, dust, grease and the dull film of oxidation that builds up on connectors over time, and many intermittent faults disappear once the contacts are clean again.
Why contacts fail
Every connector relies on clean metal touching clean metal. Outdoors, humidity, dust and temperature changes slowly coat the contacts, and the connection becomes unreliable. In Kenya this is common on outdoor camera connections in humid coastal and lakeside areas, and in dusty places through the dry season. The symptoms are familiar to installers: video that flickers or drops, cameras that restart, a crackling volume knob or a remote control that only works if pressed hard.
- 100 ml spray can.
- For connectors, switches and contacts.
- Helps cure intermittent faults from dirty contacts.
- Small can for a toolbox or service kit.
What to use it on
- BNC, RJ45 and DC power connectors on CCTV cameras and recorders.
- Power jacks, switches and push buttons.
- Volume and tone controls on audio equipment.
- Battery contacts and remote control keypads.
- Card edge connectors and sockets on circuit boards.
How to use it safely
Always switch off and unplug the equipment first. Spray a short burst onto the contact, or use the straw if one is supplied for tight spaces. Work the connector in and out, or move the switch or knob back and forth, to help the cleaner reach the contact surfaces. Wipe away loosened dirt with a lint-free cloth or cotton bud, then allow the cleaner to evaporate fully before switching back on.
Many contact cleaners are flammable, so use the spray in a well-ventilated area, away from flames, sparks and hot soldering irons. Some plastics can be affected by solvents, so test on a small hidden area first if unsure. Read the instructions and warnings on the can, as products differ: some evaporate completely, while others leave a light protective film.
Prevention
After cleaning outdoor connectors, protect them from the weather with a junction box and self-amalgamating tape. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect in Nairobi CBD or order delivery within Nairobi or by courier across Kenya.
Frequently asked questions
Can contact cleaner fix a flickering CCTV camera?
If the flicker comes from a dirty or oxidised connector, often yes. Power off, clean the BNC or RJ45 connector and the DC power jack at both ends, let it dry and reconnect. If the problem remains, check the cable, the power supply and the camera itself, as contact cleaner cannot fix a damaged cable or failing power supply.
Can I spray contact cleaner on equipment that is switched on?
No. Always switch off and unplug the equipment first, and let the cleaner evaporate completely before switching back on. Many contact cleaners are flammable, and spraying live equipment risks short circuits, sparks and damage. Work in a ventilated area away from flames and hot tools.
Is contact cleaner the same as foam cleaner?
No. Contact cleaner is a solvent for metal contacts inside connectors and switches. Foam cleaner is for wiping the outside surfaces of equipment, such as plastic casings and keyboards. Use each for its own job and do not spray foam cleaner into connectors.