
TP-Link Gigabit Single-Mode WDM Fibre Media Converter 3 km TL-FC311A-3
The TP-Link TL-FC311A-3 is a gigabit fibre media converter that links a copper network to a single-mode fibre over distances of up to 3 km, using just one fibre core. It has one SC fibre port and one gigabit RJ45 port and works as a pair with the TL-FC311B-3, for CCTV and network links across Kenyan compounds and estates.
- Gigabit SC fibre port plus gigabit RJ45 port
- Single-mode, single-fibre WDM link up to 3 km
- Sends 1550 nm, receives 1310 nm
- Pairs with TL-FC311B-3 at the far end
- Operates from -20 °C to 60 °C
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The TP-Link fibre media converter TL-FC311A-3 changes a normal Ethernet signal into light and sends it over single-mode fibre optic cable, then a matching converter at the far end changes it back. It lets you run a network link up to 3 km, far beyond the 100 metre limit of network cable, and it needs only one fibre core for both directions. It is used in Kenya to connect gate houses, outbuildings, warehouses and separate blocks to the main network or CCTV recorder.
Key features
- Gigabit fibre and copper: one 1.25 Gbps SC fibre port and one 100/1000 Mbps auto-sensing RJ45 port.
- Single fibre with WDM: sends at 1550 nm and receives at 1310 nm on the same fibre core, halving the fibre needed.
- Up to 3 km: over 9/125 µm single-mode fibre.
- Works in a pair: use with the TL-FC311B-3 at the other end, which sends at 1310 nm and receives at 1550 nm.
- Status LEDs: Link/Act for the fibre and copper ports, plus power.
- Wide temperature range: operates from -20 °C to 60 °C.
- Low-voltage power: 5 V DC, 0.4 A, and accepts up to 12 V input.
Where to use it
Use a TL-FC311A-3 and TL-FC311B-3 pair when cameras or a network switch are too far away for a single Cat6 run, or where cable passes near power lines, motors or lightning-prone open ground, as fibre does not carry electrical interference. Typical jobs include linking a gate house to the main house on a large plot, connecting cameras in a car park or farm store back to the NVR, and joining two office buildings in an estate or business park.
Installation and setup
Place the TL-FC311A-3 at one end and the TL-FC311B-3 at the other. Connect the single-mode fibre with SC connectors to each converter's fibre port, and connect each RJ45 port to a switch, NVR or router with Cat5e or Cat6 cable. Power both converters. There is nothing to configure; the Link/Act LEDs show when the fibre link is up.
What you need with it
- One TL-FC311B-3 for the far end
- Single-mode 9/125 µm fibre with SC connectors
- A switch, NVR or router at each end
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order for delivery within Nairobi or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Do I need two of these converters?
You need two converters, but not two of the same model. The TL-FC311A-3 sends at 1550 nm and receives at 1310 nm, so the unit at the other end must be its partner, the TL-FC311B-3, which does the opposite. Two A units or two B units will not link. Buy them as a pair for each fibre run.
How far can it send video and data?
Up to 3 km over 9/125 µm single-mode fibre. That covers most compounds, farms, schools and business parks. The actual distance also depends on the fibre quality and the number of joints and connectors along the run. Multi-mode fibre is not the right medium for this converter, so check the fibre type before buying.
Can I use it to connect CCTV cameras far from the NVR?
Yes. Put a PoE switch and the TL-FC311B-3 near the remote cameras, run fibre back to the main building, and connect the TL-FC311A-3 there to your NVR or main switch. The fibre carries the video from all the cameras on that switch. Fibre does not carry power, so the remote switch needs its own power supply.
Does the RJ45 port work with 10 Mbps devices?
TP-Link lists the RJ45 port as 100/1000 Mbps auto-sensing, so connect it to a Fast Ethernet or gigabit switch, NVR or router. Almost all current network equipment supports these speeds. Very old devices that run only at 10 Mbps are not listed as supported.