Fibre Fast Connectors
A fibre fast connector is a field-fitted connector that terminates a fibre on site with hand tools instead of a fusion splicer. FTTH installers in Kenya use it to finish drop cables at the ATB or router quickly, and to repair a damaged cable end.
- Fits a connector on site with hand tools
- No fusion splicer needed
- Ideal for drop cable and repairs
- Quick single-fibre terminations
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A fibre fast connector, also called a field-assembly or quick connector, lets you fit a connector to a fibre on site using hand tools. Inside the connector, a short pre-polished fibre meets the cable fibre in a mechanical alignment, so there is no need for a fusion splicer. That makes it a favourite for drop cable work.
Where fast connectors help
- Terminating a drop cable at the ATB or straight at the router
- Repairing a fibre end that has been broken or cut short
- Quick connections in places where carrying a splicer is impractical
- Small jobs where a single fibre needs a connector
FTTH installers working across Nairobi apartments and estates fit fast connectors every day, because most home connections need only one fibre terminated at each end.
Tools you need
Fast connectors are quick to fit, but only with the right tools and clean work:
- A drop cable stripper and a fibre stripper
- A precision fibre cleaver, for a clean, square end
- Alcohol wipes or fibre cleaning supplies
- A visual fault locator or power meter to test the result
The cleave is the most important step. A poor cleave is the main reason a fast connector shows high loss or no light at all.
How to fit one
- Strip the cable jacket and fibre coating to the lengths shown for the connector.
- Clean the bare fibre and cleave it to the stated length.
- Push the fibre into the connector until it bows slightly, showing it is seated.
- Close the clamp, fit the housing, and test the connection.
Match the connector to the network
Fast connectors come in different connector types and polishes, and for different cable types. Use the one that matches your drop cable, the adapter in the ATB and your provider's network.
What you need with it
- Fibre drop cable
- An ATB or adapter to plug into
- Stripping, cleaving and testing tools
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Do I need a fusion splicer for fast connectors?
No. Fast connectors join the fibre mechanically inside the connector, so you only need strippers, a precision cleaver, cleaning supplies and a tester. That is why they are popular for home fibre drops. For links with many fibres, splicing pigtails is usually more consistent.
Why is there no light after fitting a fast connector?
The most common causes are a poor cleave, a fibre cut to the wrong length, dirt on the fibre, or a fibre not pushed fully home. Re-strip, clean, cleave and fit again. A visual fault locator shows quickly whether light is passing through the connector.
Can I reuse a fast connector?
Some designs can be reopened and refitted a few times, while others are single-use once the clamp is closed. Check the instructions that come with the connector. In practice, installers keep spares on hand because a failed fit is part of normal field work.

