SKU KCS-ATB-EMPTY

Fibre Access Terminal Box (ATB), Empty

KSh 600
In stock — pick up today in Nairobi CBD

An empty fibre ATB (access terminal box) is the small wall box where a fibre drop cable ends inside a home or office. The empty version comes without the termination parts fitted, so installers in Kenya can fit their own adapter and pigtail, or a fast connector, to suit the job.

  • Wall box for ending a fibre drop cable
  • Supplied empty for installer-chosen parts
  • Protects fibre and spare loops
  • Neat outlet for the router patch cord
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

An empty fibre ATB box is an access terminal box supplied without the termination parts fitted inside. The ATB is the small box on the wall where the fibre drop cable from the street or building riser ends. From there, a short patch cord runs to the customer's ONT or fibre router. The empty version is for installers who prefer to choose and fit the inside parts themselves.

What an ATB does

  • Gives the drop cable a fixed, protected end point on the wall
  • Holds the spare fibre and the splice or connector safely inside
  • Provides a neat outlet where the patch cord to the router plugs in
  • Keeps the delicate fibre away from knocks, pets and cleaning

Why choose an empty box

Installers working for internet providers and estate networks around Nairobi often carry adapters, pigtails and fast connectors of a particular type to match their network. An empty box lets them fit exactly those parts, rather than paying for a set that may not match. It also suits replacing a damaged ATB lid or body where the inside parts are still good.

Installation and setup

  • Choose a position close to where the router will sit, near a power socket.
  • Fix the box base to the wall with suitable screws and plugs.
  • Bring the drop cable in, secure its strength members, and coil spare fibre gently inside without tight bends.
  • Terminate the fibre with a fast connector, or splice it to a pigtail, and fit the adapter.
  • Clean the connector end face, plug in the patch cord to the router and check the signal before closing the lid.

Handle fibre with care

Glass fibre breaks if bent too tightly. Keep loops generous, avoid pinching fibre under the lid, and keep dust caps on any connector that is not in use.

What you need with it

  • Fibre drop cable for the run to the box
  • An adapter and pigtail, or a fast connector, matching your network's connector type
  • A fibre patch cord from the box to the ONT or router
  • Fibre tools: stripper, cleaver, cleaning supplies, and a power meter or light source for testing

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

What does "empty" mean on an ATB?

It means the box comes without the termination parts fitted inside, such as the adapter and pigtail. The installer fits the parts that match their network, or uses a fast connector. If you want a box with the parts already fitted, the loaded ATB is the one to choose.

Where should the ATB be fixed?

Put it on an inside wall close to where the fibre router or ONT will sit, with a power socket nearby. Avoid spots behind doors or furniture where the box can be knocked. A short patch cord should reach the router without being pulled tight or bent sharply.

Can I install a fibre ATB myself?

Fixing the box is simple, but terminating the fibre needs fibre tools and some practice: a stripper, a cleaver, cleaning supplies and a way to test the signal. Fibre internet connections are normally set up by the provider or a trained installer, who will also check the signal level at the router.

KSh 600 In stock