SKU KCS-FIBRE-DROP-CABLE

Fibre Drop Cable (per metre)

KSh 20 per metre
In stock — pick up today in Nairobi CBD

Fibre drop cable is the cable that carries the fibre on the final stretch from a pole, distribution box or building riser to the ATB inside a home or office. It is sold per metre, so installers and homeowners in Kenya buy exactly the length the run needs.

  • Fibre cable for the final run to a building
  • Sold per metre, cut to length
  • For new and replacement FTTH drops
  • Terminates with fast connectors or pigtails
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

Fibre drop cable is the cable used for the last part of a fibre internet connection: the run from the distribution point on a pole, in a street cabinet or in a building riser to the access terminal box (ATB) inside the home or office. It is sold per metre, so you pay for the length you need rather than a whole drum.

Where it is used

  • New FTTH connections to homes and apartments
  • Office and shop fibre connections from a building riser
  • Replacing a drop cable damaged by building work, roofing or animals
  • Extending a run when a router or ATB is moved

Fibre networks have spread quickly across Nairobi estates and other towns in Kenya, and drop cable is the part that most often needs replacing, because it is the section exposed on walls, poles and roof edges.

Measuring the run

Walk the route the cable will take, from the distribution point to the ATB, and measure along it, including drops down walls and any detours around windows and gutters. Add extra for securing the cable at each end and for a coil of spare at the ATB, so the fibre can be re-terminated later. Buying per metre means you can get the run plus a sensible allowance without leftover drum.

Installation tips

  • Pull the cable by its strength members or sheath, never by the fibre inside.
  • Avoid tight bends and kinks; glass fibre cracks if bent too sharply.
  • On poles and walls, hold the cable with suitable drop clamps or hooks, not by crushing it under tight ties.
  • Keep it clear of sharp roof sheet edges and moving gates.
  • Seal wall entries so rain does not track along the cable into the building.

Terminating the cable

At the ATB the fibre is either spliced to a pigtail or fitted with a fast connector. Both need fibre tools: a drop cable stripper, a cleaver and cleaning supplies, and a power meter or light source to check the result.

What you need with it

  • An ATB at the customer end
  • Fast connectors or pigtails for termination
  • Drop clamps or hooks for aerial and wall runs

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

How much fibre drop cable do I need?

Measure the full route from the distribution point to the ATB, including vertical drops and detours, then add extra at both ends for securing the cable and a spare coil at the ATB. Since the cable is sold per metre, you can buy exactly that length rather than a whole drum.

Can I join two pieces of drop cable?

Fibre can be joined by fusion splicing inside a protected closure, but every joint adds some signal loss and is a weak point. For a short drop it is usually better to replace the whole run with one continuous length. Ask your installer before joining cable on an existing connection.

Why did my fibre connection stop after building work?

Drop cable on walls and roofs is easily damaged by ladders, roofing sheets, painting or tight cable ties. A sharp bend or crush can break the glass inside even when the sheath looks fine. A technician can locate the fault with a light source or tester and replace the damaged length.

KSh 20 In stock