SFP Fibre Module ES3112-3NCD10KN
An SFP fibre module is a small plug-in transceiver that gives a switch, router or media converter a fibre connection. This module, model ES3112-3NCD10KN, slots into an SFP port so the device can link to another building or network cabinet over fibre, on network and CCTV jobs in Kenya.
- Plug-in fibre transceiver for SFP ports
- Adds a fibre link to switches and routers
- Hot-pluggable, no tools needed
- Must match the module at the far end
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
An SFP fibre module is a small, hot-pluggable transceiver about the size of a finger. It slides into an SFP port on a switch, router or media converter and turns that port into a fibre connection. The fibre patch cord plugs into the front of the module, and the device sends and receives data over fibre instead of copper. The module in stock carries the model code ES3112-3NCD10KN.
Where SFP modules are used
- Linking a PoE switch at a remote camera group back to the main switch over fibre
- Joining network cabinets in different buildings on a compound or campus
- Connecting a switch to a media converter at the far end of a fibre run
- Uplinks from building switches to an internet provider's equipment
On larger CCTV systems around Nairobi, fibre links between switches are common where camera groups sit far from the NVR, because fibre covers much longer distances than network cable and is not affected by electrical interference.
Both ends must match
A fibre link only works when the two ends agree. Before you buy, check the module against the device at the other end of the fibre:
- Speed: both ends must run at the same speed.
- Fibre type and wavelength: single-mode or multimode, and matching wavelengths; single-fibre modules come in matched pairs.
- Connector: the module's connector must match your patch cord.
- Distance: the module must be rated for the length of the run.
Some switch makers only accept modules coded for their own equipment, so check that your switch accepts third-party SFP modules.
Installation and setup
- Remove the dust plug and slide the module into the SFP port until it clicks.
- Clean the patch cord connectors and plug them into the module.
- Check the port link light on both devices and confirm the link in the switch settings if it is managed.
Handle modules by the body, keep dust plugs in unused ports, and never look into a module or fibre that may be live.
What you need with it
- A switch, router or media converter with an SFP port
- A matching module or converter at the other end
- Fibre patch cords and the fibre run itself
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Will this SFP module work in my switch?
It works in an SFP port when the switch accepts the module and the speed matches. Some switch brands only accept modules coded for their own equipment, so check your switch documentation. Bring the switch model to the shop and our team can help you check compatibility before you buy.
Do I need two SFP modules for a fibre link?
You need a matching fibre interface at each end. That can be a second SFP module in a switch at the far end, or a media converter with matching optics. Speed, fibre type, wavelength and connector must agree at both ends, and single-fibre modules must be used as a matched pair.
Can I plug it in while the switch is running?
Yes. SFP modules are designed to be hot-pluggable, so you can insert or remove one without switching the device off. Slide it in until it clicks, then connect the fibre. Before removing it, unplug the fibre first and use the release latch rather than pulling the module.