RJ45 Coupler Female to Female
An RJ45 coupler is a small joiner with an RJ45 socket on both ends, used to connect two network cables into one longer run. It suits quick extensions of camera or network leads in homes, shops and offices in Kenya, where a cable falls a little short.
- RJ45 socket on both ends
- Joins two network cables into one run
- No tools needed
- Compact and easy to mount
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
An RJ45 coupler is a small in-line joiner with a socket on each end. You plug one network cable into one side and a second cable into the other, and the two behave as one longer cable. It is a handy fix in Nairobi shops and homes when a lead ends just short of the equipment.
Key features
- RJ45 socket at both ends, so it takes ordinary RJ45 plugs.
- Compact body that can sit behind a desk, in a cabinet or in a junction box.
- No tools or setup needed: plug in, and click each plug home.
Where to use it
The most common use is extending a patch lead, for example between a router and a switch or from a wall point to a PC. In CCTV, it can join two lengths of cable when an IP camera needs a slightly longer run than the cable you have.
It is also useful when a cable has been pulled through a conduit with a plug on one end and you need to join it to a shorter lead at the equipment.
Things to keep in mind
- Every extra joint adds a little signal loss, so use one coupler where you can, not a chain of them.
- The joined run is only as good as the weakest cable and plug in it, so use the same cable category throughout.
- Network cable has a length limit for Ethernet, so a coupler is not a way to run cable beyond that limit. Long runs need a proper single cable or a switch in the middle.
- For a permanent outdoor joint, a coupler left exposed to rain and dust is not suitable; keep it indoors or in a protected enclosure.
What to buy with it
You may also need extra network cable, RJ45 connectors and boots, and a cable tester to check the joined run. If a camera cable has to be rerouted properly, Kefa Solutions technicians can install CCTV cameras and cabling. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock.
Frequently asked questions
What does a female to female RJ45 coupler do?
It has an RJ45 socket on both ends, so you can plug the male plugs of two cables into it and join them. The result is one longer connection. It is the quickest way to extend a patch lead without cutting or re-crimping cable.
Will a coupler affect my camera or network speed?
Each joint can add a small loss, so keep the number of couplers to a minimum and use cable of the same category on both sides. A single good coupler on a short run is normally fine. After joining, test the link, and keep total cable length within the usual Ethernet limits.
Can I leave a coupler outside?
It is not made for exposure to rain, dust or damp, so keep it indoors or inside a protected junction box. For outdoor camera cable, avoid joints in the open where you can, or ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi, how best to protect the joint.

