SKU KCS-PATCH-3M

Network Patch Cord 3 m

KSh 400
In stock — pick up today in Nairobi CBD

A 3 m network patch cord is a ready-made lead with a plug at each end and generous reach for connecting equipment across a room, along a wall or between desks. In Kenya it is used for routers, TVs, recorders and workstations that sit some way from the network socket.

  • Fixed 3 m length
  • Connector at each end, ready to use
  • Reaches across a room or along a wall
  • Gives slack to route around furniture
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A 3 m patch cord is the longest of the three lengths we stock. Three metres is enough to take a connection from a wall socket round furniture or along a skirting board to the equipment, and it is the one to choose when 2 m would leave you short.

What a 3 m lead suits

Use it where the equipment is not close to the socket. A television mounted on the far wall, a recorder in a corner cupboard, a computer on a desk that is not next to the network point, or a switch placed on top of a wardrobe-height shelf can all need around three metres. In a comms room it also helps when a switch sits several rack units away from the patch panel.

Key features

  • Fixed length of 3 m
  • Connector at each end, ready to use
  • Reaches across a room or along a wall
  • Gives room to route around furniture

Where to use it in Kenya

In a Nairobi flat, 3 m cords connect a router in the hallway to a TV in the lounge. In an office, they join staff computers to wall points on the far side of a desk. In a shop, they carry the link from a wall socket to a CCTV recorder placed in a lockable cupboard away from the counter.

Installation and setup

Measure the route first, including height changes, and add a little slack. Plug each end in until the clip clicks. Keep the cord clear of doorways and walkways, and secure it with clips or ties so no one trips on it. Do not coil the surplus tightly or squeeze it in a corner; a loose loop is better.

What you need with it

  • Equipment and wall points with network ports
  • Cable clips or trunking for the route
  • A shorter 1 m or 2 m cord where the devices are closer

Choosing the length

If the route is more than about 3 m, use a cord that is longer, or run proper cable to a wall socket instead. A very long patch cord on a long route is untidy and a trip risk.

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the cord in stock.

Frequently asked questions

When should I choose a 3 m patch cord?

Choose it when equipment is a few metres from the socket, such as a TV on the far wall, a recorder in a cupboard, or a computer on the other side of a desk. Measure the route, including height changes, and allow a little slack.

Is there a limit on patch cord length?

Ethernet links are designed for up to about 100 metres in total, and patch cords form part of that total. A 3 m cord uses very little of it. For long distances, use proper installed cable to a wall socket rather than a long patch cord.

How should I tidy a patch cord that is too long?

Do not wind it tightly or tuck it into a corner, since sharp bends can damage the cable. Coil the surplus in a loose loop and secure it with a strap, or swap to a shorter cord. Our Nairobi team can help you choose.

KSh 400 In stock