SKU KCS-PATCH-1M

Network Patch Cord 1 m

KSh 200
In stock — pick up today in Nairobi CBD

A 1 m network patch cord is a short ready-made lead with a plug at each end. At one metre it is the right length for linking neighbouring equipment, such as a switch to the patch panel above it or a recorder to a switch in the same rack, in Kenyan offices and CCTV rooms.

  • Fixed 1 m length
  • Connector at each end, ready to use
  • Keeps cabinets and racks neat
  • Suits switch, patch panel and recorder links
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A 1 m patch cord is the shortest of the three patch cord lengths we stock. It is a ready-made network lead with a connector at each end, used for short connections where a longer lead would only add clutter.

What a 1 m lead suits

One metre is enough to run between two pieces of equipment that sit close together. Typical uses are a patch panel to the switch directly above or below it, a switch to a PoE injector on the same shelf, or a network video recorder to a switch in the same cabinet. Long leads in a small cabinet form loops that block airflow and are hard to trace, so a short lead keeps things tidy.

Key features

  • Fixed length of 1 m
  • Connector at each end, ready to use
  • Suits equipment mounted close together
  • Easy to label and swap

Where to use it in Kenya

Use 1 m cords inside comms cabinets and wall racks in Nairobi offices, shops and homes, where the patch panel, switch and recorder are stacked together. They are also useful behind a TV or desk where a router sits right next to a computer or set-top box.

Installation and setup

Plug the cord into the equipment ports until the clip clicks, and route it so it is not bent sharply at the connector. Use cable ties or hook-and-loop straps to keep it neat. Label each end to match the patch panel position. If the two devices end up further apart than the cord reaches, never pull the lead tight; swap it for a longer one.

What you need with it

  • Equipment with network ports at both ends
  • Cable ties or straps and labels
  • A longer patch cord, such as 2 m or 3 m, for devices that are further apart

Choosing the length

If the devices are on the same shelf or next to each other in a rack, 1 m is usually plenty. If they are separated by a few units of rack space or sit on opposite sides of a desk, consider 2 m or 3 m.

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the cord in stock.

Frequently asked questions

When is a 1 m patch cord the right choice?

When the two devices sit close together, such as a switch and patch panel in the same rack, or a recorder and switch on one shelf. A short lead keeps the cabinet tidy, avoids loops that block airflow, and makes each connection easy to trace and label later.

Can I use it to connect an IP camera?

Only if the camera is within a metre of the switch, which is rare. Cameras are normally connected with a longer solid cable run to the wall, with a patch cord only at the equipment end. Use a 2 m or 3 m cord where you need more reach.

How do I know what category it is?

The type of cord, such as Cat5e or Cat6, needs confirming for the unit in stock. Please ask our Nairobi team at the Kefa CCTV Shop before you buy if you need a specific category, for example for a gigabit or PoE link.

KSh 200 In stock