Fire Alarm Cable 1.5 mm
This is cable sold as fire cable in a 1.5 mm size. Fire cable is used to wire fire alarm panels, detectors, sounders and call points. It suits Kenyan buildings that need fire alarm circuits wired, with the cable chosen to match the system design.
- Fire cable in 1.5 mm size
- For panel, detector and sounder circuits
- Suits longer or higher-current circuits
- Keeps fire wiring separate from CCTV wiring
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
Fire alarm cable 1.5 mm is wire made for the circuits of a fire alarm system. It connects the fire alarm panel to the detectors, manual call points and sounders spread around a building. The 1.5 mm size refers to the conductor size and is a common size for the wiring of sounders and for longer circuits.
What the 1.5 mm size means
The size of a conductor decides how much current it can carry and how far it can run before the voltage drops. A 1.5 mm conductor carries more than the thinner sizes often used for detector loops, which makes it a choice for sounder circuits and for long cable runs on larger sites. Confirm the right size against the instructions for your panel.
Key features
- Fire cable in 1.5 mm size
- For fire alarm panel, detector and sounder wiring
- Suits longer or higher-current circuits better than thinner sizes
- Separate cores for each connection
Where to use it in Kenya
Use it in offices, schools, hotels, hostels, shops and warehouses in Nairobi and beyond, where a conventional or addressable fire alarm panel needs cable run to its devices. It is separate from CCTV and burglar-alarm wiring, and fire circuits should be kept as their own system.
Installation and setup
Follow the panel maker's wiring diagram and the design for the building, including the number of cores and the end-of-line arrangement. Support the cable at regular spacing, keep it away from mains cable unless your design says otherwise, and avoid sharp bends. Record the route and test each circuit before commissioning. A fire alarm in a commercial building should be designed and signed off by someone qualified.
What you need with it
- A fire alarm panel and compatible detectors, sounders and call points
- Cable clips or conduit
- A multimeter for continuity checks
Before you buy
Please check the cable rating your fire alarm design needs. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the cable in stock, including the number of cores and how it is sold.
Frequently asked questions
What is fire cable used for?
It wires the circuits of a fire alarm system, linking the panel to smoke or heat detectors, manual call points and sounders. It should be installed to the panel instructions and the system design, and kept separate from CCTV cable.
Can I use fire cable for CCTV or burglar alarms?
It is intended for fire alarm circuits, and it is better to keep fire wiring separate from other systems. For alarm sensors use alarm cable, and for cameras use coaxial or network cable. Ask our Nairobi team if you are unsure which cable suits your job.
How do I know how many cores I need?
The number of cores and the size depend on the fire panel and the design of the circuits. Check the panel instructions, or ask a qualified fire alarm installer, before you buy. Our team can confirm what cable the shop has in stock.