SKU KCS-FIBRE-SPLITTER-1X8

Fibre Splitter 1x8

KSh 3,000
In stock — pick up today in Nairobi CBD

A 1x8 fibre splitter divides one fibre feed into eight outputs. It is a popular size for apartment floors, estate courts and office buildings, letting one PON fibre serve eight users. Internet providers and estate network installers in Kenya use it in distribution boxes and building risers.

  • Shares one fibre feed between eight outputs
  • Passive: no power or setup
  • Suits apartment floors and estate courts
  • Plan the signal budget carefully
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A fibre splitter 1x8 divides the light arriving on one fibre into eight outputs. It is passive, needs no power, and is usually fitted in a distribution box on a building floor, in a riser cupboard or on a pole. With one 1x8, a single feeder fibre can serve eight homes, flats or offices.

Where a 1x8 split fits

Eight outputs suits a building or cluster with several users close together:

  • One floor of an apartment block, with drops to each flat
  • An estate court or a short street of houses
  • A small office building with several tenants
  • The final stage of a cascade, after a 1x2 or 1x4 upstream

Apartment blocks in Nairobi often have a distribution box on each floor or in the stairwell. A 1x8 in that box keeps each drop cable short and makes it simple to connect new tenants as they sign up.

Signal budget matters more

Splitting light eight ways leaves each output with an eighth of the input. In theory that is a loss of about 9 dB, and real splitters lose a little more. This is a big part of a link's power budget, so plan carefully:

  • Add the splitter loss to fibre, splice and connector losses
  • Allow extra for any upstream splitter in a cascade
  • Keep connectors clean, because dirt adds loss quickly
  • Measure each output before connecting a customer

If the total loss is too high, the ONUs at the far end will struggle to stay online.

Installation and setup

  • Mount the splitter in a protected distribution box or closure.
  • Connect or splice the input to the feeder fibre and the outputs to the drop cables.
  • Route fibres without tight bends, and label every output with the flat or house it serves.

Not for media converter links

Splitters are for PON systems with an OLT and ONUs. A fibre link between two points for CCTV uses a pair of media converters, not a splitter.

What you need with it

  • A distribution box or closure sized for the splitter
  • Pigtails, fast connectors or splicing tools
  • Drop cable and an ATB for each user

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

Is a 1x8 splitter right for my apartment block?

For a floor or block with up to eight units, a 1x8 in a floor distribution box is a common choice. For more units, use several 1x8 splitters fed from an upstream splitter. Check that your OLT port supports the total number of users and that the signal budget allows the combined losses.

How much signal does a 1x8 splitter lose?

Dividing light eight ways is, in theory, a loss of about 9 dB, and real splitters add a little more. The exact figure for a unit is on its label or test sheet. Add it to the fibre, splice and connector losses to make sure the ONUs receive a usable signal.

Do all eight outputs need to be connected?

No. Unused outputs can stay capped until new customers join. Keep the dust caps on, or keep bare output fibres coiled and protected in the box. Label each output when it is put into use so faults and changes are easy to manage later.

KSh 3,000 In stock