Fibre Splitter 1x2
A 1x2 fibre splitter divides the light from one fibre into two outputs. It is the smallest passive splitter, used to serve two homes or buildings from one fibre feed, or as the first stage of a larger split in FTTH and PON networks in Kenya.
- Divides one fibre feed into two outputs
- Passive: no power needed
- Lowest split loss of common sizes
- First stage of a cascaded split
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A fibre splitter 1x2 takes the signal arriving on one fibre and shares it between two output fibres. It is passive: there is no power supply and nothing to configure. In a PON (passive optical network) such as GPON or EPON, splitters are what let one fibre from the provider's equipment serve several customers.
What a 1x2 split is used for
With only two outputs, a 1x2 splitter suits small or early-stage jobs:
- Serving two houses, two shops or two flats from one incoming fibre
- Feeding two buildings on a compound from one fibre drop
- Acting as the first stage of a cascade, with a larger splitter on each branch
- Adding a second connection where a spare fibre is not available
Because the light is divided only two ways, a 1x2 splitter costs the least signal of the common sizes. In theory each halving of the light is a loss of about 3 dB, and real splitters lose a little more than that. This leaves more of the power budget for long distances, which helps on rural and estate runs where the customers are far from the cabinet.
Splitters need PON equipment
A splitter works with PON equipment: an OLT at the provider end and ONUs or ONTs at the customer end. It does not work for sharing a pair of ordinary media converters, which are made for one-to-one links. If you are building a CCTV fibre link between two points, use media converters without a splitter.
Installation and setup
- Fit the splitter in a closure, terminal box or cabinet that protects it.
- Splice or connect the input to the feeder fibre, and the two outputs to the drop cables.
- Keep fibre loops generous and avoid pinching the splitter body or its leads.
- Check the signal at each output with a power meter before connecting customers.
Label which output serves which customer, so faults can be traced later.
What you need with it
- A closure, distribution box or ATB to house it
- Pigtails, fast connectors or splicing equipment
- Drop cable to each customer
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
What can I do with a 1x2 fibre splitter?
You can share one PON fibre feed between two customers or buildings, or use it as the first stage of a cascade with larger splitters on each branch. It is also useful when you need a second connection on a route that has no spare fibre left.
Can I use a splitter to share my media converter link?
No. Ordinary media converters make one-to-one links, and a splitter will not let a third converter join. Splitters are for PON systems, where an OLT talks to several ONUs and each ONU takes its share in turn. For CCTV between two points, use a pair of media converters.
How much signal does a 1x2 splitter lose?
Splitting light two ways halves it, which in theory is a loss of about 3 dB, and real splitters lose slightly more. The exact figure for a unit is on its label or test sheet. Add it to your link power budget along with fibre, splice and connector losses.