SKU KCS-FIBRE-PIGTAIL

Fibre Pigtails

KSh 100
In stock — pick up today in Nairobi CBD

A fibre pigtail is a short length of fibre with a factory-fitted connector on one end and bare fibre on the other. Installers splice the bare end to an incoming cable inside an ATB, termination box or patch panel, giving a reliable connector for fibre networks in Kenya.

  • Factory-fitted connector on one end
  • Bare fibre end for fusion splicing
  • For ATBs, termination boxes and panels
  • Low-loss, repeatable fibre termination
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A fibre pigtail is a short fibre lead with a connector fitted at the factory on one end and bare fibre on the other. Instead of fitting a connector to a cable on site, the installer joins the bare end of the pigtail to the incoming fibre, normally by fusion splicing. The result is a connector with a factory-polished end face, which gives a dependable, low-loss connection.

Where pigtails are used

  • Inside an ATB, where the drop cable is spliced to a pigtail that plugs into the adapter
  • In fibre termination boxes and patch panels, one pigtail per fibre
  • In closures and distribution boxes on PON networks
  • At each end of a fibre link between buildings, before the media converters

On CCTV and network jobs around Nairobi where fibre links a gatehouse or outbuilding, installers typically end the cable in a small termination box at each end, splice pigtails onto the fibres, and connect the media converters with patch cords.

Pigtail or fast connector?

Pigtails need a fusion splicer, while fast connectors are fitted with hand tools. A spliced pigtail generally gives lower loss and a more consistent result, which matters on long runs and in boxes with many fibres. Fast connectors are quicker for single drops when no splicer is available.

Installation and setup

  • Strip and clean the incoming fibre and the pigtail's bare end.
  • Slide a splice protection sleeve onto one fibre before splicing.
  • Cleave both ends cleanly and fusion-splice them.
  • Shrink the sleeve over the splice and lay it in the splice tray or holder.
  • Coil the spare fibre gently and plug the connector into the adapter.

Test the link with a light source and power meter before handing over.

Match the connector

Pigtail connectors differ in type and polish. Use the same type and polish as the adapter and patch cords on the rest of the link.

What you need with it

  • A fusion splicer and splice protection sleeves
  • An ATB, termination box or patch panel with adapters
  • Fibre stripping, cleaving and cleaning tools

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

What is a fibre pigtail used for?

It gives a fibre cable a factory-quality connector. The bare end of the pigtail is spliced to the incoming fibre, and the connector end plugs into an adapter in an ATB, termination box or patch panel. From there, a patch cord connects the equipment.

Do I need a fusion splicer to use pigtails?

In practice, yes. Pigtails are designed to be fusion-spliced, which melts the two glass ends together for a low-loss joint. If you do not have a splicer, fast connectors are an alternative that can be fitted with hand tools, at the cost of a slightly less consistent result.

Which connector type do I need?

Use the same connector type and polish as the adapter in your box and the patch cords you will use. Mixing types does not fit, and mixing polishes causes loss and can damage connectors. Check the existing equipment or your network design before buying.

KSh 100 In stock