SKU KCS-FIBRE-PATCH-SC-SC

Fibre Patch Cord SC to SC

KSh 300
In stock — pick up today in Nairobi CBD

An SC to SC patch cord is a short fibre optic lead with an SC connector on each end. It connects a fibre wall box (ATB) to a fibre router or ONT, or links equipment in a cabinet, and is one of the most used fibre leads in homes and offices in Kenya.

  • SC connector on both ends
  • Links ATB to router or ONT
  • Push-pull connectors, easy to fit
  • Match polish: UPC blue, APC green
How our CCTV installation works, and what it costs ↗
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

An SC to SC patch cord is a fibre optic lead with a square, push-pull SC connector on each end. It does the same job as a network patch lead does for copper: it makes the short connection between a fixed fibre outlet and the equipment. The SC connector is widely used on fibre broadband equipment, which makes this lead a common need.

Where it is used

  • From the ATB on the wall to the fibre router or ONT in a home or office
  • Between a fibre patch panel or termination box and a media converter in a cabinet
  • Replacing a damaged or lost lead after moving a router
  • Linking equipment during testing and fault-finding

Match the connector type

Fibre leads must match the equipment and the network on three points, or the connection will be weak or will not work at all:

  • Fibre type: single-mode or multimode. Fibre broadband in homes and offices runs on single-mode.
  • Polish: SC connectors come in UPC, usually blue, and APC, usually green. An APC connector must only mate with APC, and UPC with UPC, or the end faces can be damaged and signal lost.
  • Simplex or duplex: one fibre for broadband and single-fibre equipment, or a pair for equipment with separate transmit and receive fibres.

Check the colour of the connector already on your ATB or router, or bring the old lead with you.

Handling and cleaning

Fibre end faces are tiny, and a speck of dust can block much of the light. Keep the dust caps on until the moment you connect, never look into a connector that may be live, and clean the end face with a proper fibre cleaning tool if the connection is poor. Do not bend the lead tightly or trap it under furniture, because the glass inside can crack.

What you need with it

  • An ATB, patch panel or adapter with an SC port
  • Equipment with a matching SC port, such as an ONT or media converter
  • Fibre cleaning supplies

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

Will this patch cord work with my fibre router?

It will if your router and ATB both use SC ports and the polish matches. Look at the existing connectors: green usually means APC and blue usually means UPC. Use a lead whose connectors match at both ends. Home fibre broadband uses single-mode fibre, so the lead must be single-mode too.

What is the difference between APC and UPC?

They are different polishes of the connector end face. APC is angled and usually green; UPC is flat and usually blue. They must not be mixed, because an APC connector pressed against a UPC one leaves a gap, causes high signal loss and can damage both end faces.

My fibre internet is slow or down after moving the router. Could it be the patch cord?

Yes. A lead that was bent sharply, pulled hard or left without dust caps may be damaged or dirty. Check the router's fibre signal light, clean the connectors with a fibre cleaner, and try a replacement lead. If the problem stays, the issue may be in the drop cable.

KSh 300 In stock