Fibre Media Converter 1000 Mbps
A 1000 Mbps media converter changes a copper network connection into a fibre one at 1000 Mbps, for long links that carry a lot of traffic. It suits linking large IP camera systems, whole office blocks and campus buildings over distances network cable cannot reach, on sites across Kenya.
- Links copper network cable to fibre
- 1000 Mbps fibre link speed
- Backbone links for many cameras or offices
- Room to grow on busy networks
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 1000 Mbps media converter links copper network cable to fibre optic cable at ten times the speed of a 100 Mbps unit. Like any media converter, it gets around the roughly 100-metre limit of a network cable run, and fibre between buildings does not pick up electrical interference or lightning-induced surges.
When to choose 1000 Mbps
This is a base 1000 converter, meaning the fibre link runs at 1000 Mbps. Pick it when the link is a backbone rather than a single feed:
- Linking a remote PoE switch with many IP cameras back to the NVR
- Connecting two office buildings so staff share files, printers and internet
- Joining blocks on a school, hospital or factory campus
- Leaving headroom for cameras and users you plan to add later
A link that carries many high-resolution camera streams, recorded footage being played back, and office traffic at the same time can fill a 100 Mbps link. A 1000 Mbps link has room to spare.
Check both ends match
Both ends of the fibre link must run at the same speed, so a 1000 Mbps converter pairs with another 1000 Mbps converter, or with a switch fibre port of the same speed and optics. Fibre type, wavelength and connector must match too. Single-fibre converters come as A and B units and must be used as a pair. The network port at each end should connect to equipment that runs at 1000 Mbps, or the copper side will run slower.
Installation and setup
- Plan the fibre route between buildings, in conduit when buried.
- Terminate the fibre with connectors that suit the converter's fibre port.
- Mount the converters in a cabinet with power and, ideally, a UPS.
- Connect the network ports, then check the link lights at both ends.
Label each end so future technicians know which converter goes with which building.
What you need with it
- A matching converter or a switch with a matching fibre port for the far end
- Fibre cable, connectors or patch cords
- Network patch leads, power and a cabinet at each end
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Should I choose the 100 Mbps or 1000 Mbps media converter?
Choose 1000 Mbps when the link carries many IP cameras, connects whole office networks, or must leave room for growth. For a gate camera or a small outbuilding with a few devices, 100 Mbps is often enough. Whichever you choose, both ends of the link must be the same speed.
Will it work with my switch's SFP port?
It can, if the switch fibre port has a module of the same speed, fibre type, wavelength and connector as the converter. A 1000 Mbps converter will not link to a 100 Mbps fibre port. Bring the switch model or module details to the shop and we can help you check the match.
How far can a fibre media converter reach?
The reach depends on the converter model and the fibre type, and is printed on its label or datasheet. Single-mode fibre generally reaches much further than multimode. In all cases fibre covers far longer distances than the roughly 100-metre limit of a copper network cable run.