Fibre Media Converter 100 Mbps
A 100 Mbps media converter changes a copper network connection into a fibre one, so you can link equipment far beyond the reach of network cable. It suits linking a gatehouse, outbuilding or group of IP cameras back to the main building on compounds, farms and schools in Kenya.
- Links copper network cable to fibre
- 100 Mbps fibre link speed
- Reaches far beyond network cable limits
- Suits gatehouse and outbuilding camera links
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 100 Mbps media converter turns a copper Ethernet connection (an RJ45 network cable) into a fibre optic connection, and back again at the far end. Network cable is limited to about 100 metres per run under the Ethernet standard, while fibre covers far longer distances and is not affected by lightning-induced surges or electrical interference along the route.
What 100 Mbps is good for
This is a base 100 converter, meaning the fibre link runs at 100 Mbps. That is a comfortable speed for many CCTV and small-site jobs:
- Linking a gatehouse or guard post camera back to the NVR
- Connecting an outbuilding, workshop or store with a few IP cameras
- Bringing internet or a network point to a remote office on a compound
- Replacing a long copper run that keeps failing after storms
A single IP camera stream uses only a small part of a 100 Mbps link, so a link like this can carry several cameras. For many high-resolution cameras, a large office or heavy file transfers, the 1000 Mbps version is the better fit.
How a fibre link is built
Media converters normally work in pairs: one at each end of the fibre. At the main building, the converter's network port connects to your switch or NVR; at the remote end, the second converter connects to a camera, switch or access point. Both ends must match in speed and in fibre type, and single-fibre units come as matched A and B ends.
Installation and setup
- Run fibre between the two locations, in conduit where it is buried or on walls.
- Terminate the fibre with connectors that match the converter's fibre port.
- Power each converter and connect its network port to your equipment.
- Check the link lights at both ends before closing up.
Fit the converters in a cabinet or dry enclosure, and protect their power supplies with a UPS if the link must stay up during outages.
What you need with it
- A second matching converter, or a switch with a matching fibre port, for the other end
- Fibre cable and connectors or patch cords
- Network patch leads and power at both ends
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Do I need two media converters?
Usually yes. A fibre link needs a converter at each end, one turning copper to fibre and the other turning it back. Alternatively, one end can plug into a switch that has a matching fibre port. Both ends must match in speed, fibre type and, for single-fibre units, the A and B pairing.
Is 100 Mbps enough for my CCTV cameras?
For a handful of cameras it normally is, because each camera stream uses a small share of a 100 Mbps link. If you plan many high-resolution cameras over one link, or the link also carries office traffic, choose the 1000 Mbps version so there is room to grow.
Why use fibre instead of a long network cable?
Network cable is limited to about 100 metres per run. Fibre covers much longer distances, is not affected by electrical interference, and does not carry lightning-induced surges between buildings. That makes it a reliable choice for gates, outbuildings and remote cameras on large compounds.
Can a 100 Mbps converter talk to a 1000 Mbps one?
Generally no. The fibre side of a media converter runs at a fixed speed, so both ends of the link must be the same speed. Pair a 100 Mbps converter with another 100 Mbps unit of matching fibre type and wavelength.