Dahua Model DHI-ASR1102A(V2) SKU KCS-DAHUA-ASR1102A

Dahua Fingerprint and Card Reader DHI-ASR1102A(V2)

KSh 12,000
In stock — pick up today in Nairobi CBD

The Dahua DHI-ASR1102A(V2) is an indoor fingerprint and card reader that connects to an access controller over RS-485. It stores up to 3,000 fingerprints, reads cards within 1 to 9 cm, and has a blue backlit display. It suits offices and shops in Kenya.

  • Fingerprint and card in one reader
  • Stores up to 3,000 fingerprints
  • RS-485 link to Dahua access controllers
  • Tamper alarm and blue backlit display
  • Indoor, surface-mounted
How our access control installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 4 items KSh 17,300
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

The Dahua fingerprint card reader DHI-ASR1102A(V2) lets people open a door with a finger or a card. It is a reader only, so it must be connected to a compatible Dahua access controller, which makes the final decision and operates the lock.

Key features

  • Fingerprint capacity of 3,000
  • Card reading from 1 to 9 cm, in under 0.1 seconds
  • Fingerprint response time of 1.5 seconds or less
  • Blue LCD backlight, buzzer and status indicator
  • Tamper alarm and watchdog function
  • RS-485 connection to the controller

Where to use it

Fingerprints cannot be lent or lost, which makes this reader useful for staff doors, server rooms, stock rooms and clinics in Nairobi and across Kenya. People can use a card on busy days and a fingerprint when they want a second factor.

Dahua rates the reader for indoor use, between -10 °C and +55 °C and 5 to 95 percent humidity, so fit it inside a building or a covered entrance. It is surface mounted and measures 125 x 56 x 47 mm.

Installation and what you need with it

The reader runs on 9 to 15 V DC at 200 mA, usually taken from the controller or its power supply. Besides the controller you need a lock, a power supply and cable. Dahua makes this reader for Mifare (IC) cards, with a separate -D version for EM (ID) cards, so tell us which cards your site uses. Kefa Solutions technicians can install this for you in Nairobi and beyond, so you do not have to work out the cabling yourself. Fingerprints are enrolled on the reader or through the controller software.

Buying from the Kefa CCTV Shop

You can collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or we can deliver within Nairobi (up to 45 km). Orders elsewhere in Kenya go by courier and usually arrive in 1 to 3 working days. Call or visit before you buy if you want to check the unit against your existing equipment.

Frequently asked questions

Can the ASR1102A(V2) work on its own?

No. It is a reader that connects over RS-485 to a Dahua access controller, which holds the rules and operates the door lock. You need a controller, lock and power supply in addition to the reader, and our team can help you match them.

What cards does it read?

The standard version reads Mifare (IC) cards at 13.56 MHz. Dahua also makes an ASR1102A-D version for EM (ID) cards at 125 kHz. Please confirm which version you need so your cards match the reader that you buy, and bring a sample card to the Kefa CCTV Shop if you already have cards.

Is it suitable for outdoor doors?

Dahua lists the reader for indoor use, with an operating temperature of -10 °C to +55 °C. For an outdoor entrance, fit it in a covered, protected position or choose a weather-rated reader instead. Our team at the Kefa CCTV Shop can recommend one that suits your door.

How many fingerprints can it store?

The reader stores up to 3,000 fingerprints. Verification takes 1.5 seconds or less, according to Dahua's datasheet. Enrolling is done through the controller software, and you can combine fingerprint and card verification where a door needs higher security, for example a server room.

KSh 12,000 In stock