

Electromagnetic Lock (Maglock)
An electromagnetic lock (maglock) holds a door shut with a powerful magnet and releases when power is cut. It is used with keypads, card readers or fingerprint terminals on office and commercial doors in Kenya, and needs a matching power supply and an exit button.
- Magnetic locking with no moving parts
- Works with keypads, cards and fingerprint readers
- Releases when power is cut
- For offices and commercial doors
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
An electromagnetic lock, or maglock, is a door lock that uses a powerful electromagnet to hold a door closed. It is a common choice for Kenyan offices, clinics, schools, hotels and commercial buildings where staff or residents use cards, PINs or fingerprints to enter. A maglock has no moving parts and releases immediately when its power is removed.
How it works
- Magnet and plate: the magnet is fixed to the door frame and a steel plate is fixed to the door.
- Power on: the lock holds the door shut.
- Power off: the door is free, which is why it is called fail-safe.
- Controlled by access control: a reader or controller cuts power for a moment when access is granted.
What you need with it
- A matching power supply with the correct voltage and current
- A keypad, card reader or fingerprint terminal
- An exit button, and a fire-release or break-glass unit where required
- Battery backup, so the door behaves as planned in a power cut
- Cable and fixing screws or brackets
Safety and installation
Because a maglock releases when power is lost, it is suitable for doors that must open in an emergency, but it must always be installed with an exit button or release so people can leave quickly. Check the local fire safety needs for the building before fitting it to a final exit door.
Fit the magnet on the frame, directly in line with the armature plate on the door, so the faces meet flat. Misalignment reduces holding force. Keep the cable route tidy and protected, and test the lock several times, including a power-off test, before leaving the site.
Kefa Solutions technicians can install access control systems, including readers, locks, power supplies and wiring.
Buying in Kenya
You can collect this item from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD. We deliver within Nairobi (up to 45 km) and send by courier across Kenya, normally in 1 to 3 working days.
Frequently asked questions
How does an electromagnetic lock work?
An electromagnet on the door frame holds a metal armature plate fixed to the door. While power flows, the magnet holds the door. When the access controller cuts power, the door is free to open. It has no moving parts.
What happens in a power cut?
A maglock is fail-safe: without power it releases. For that reason a battery backup is usually fitted to the power supply, and a fire-release or break-glass unit is needed on escape routes, so people can always leave in an emergency.
What do I need to run a maglock?
You need a power supply of the correct voltage and current for the lock, an access controller or fingerprint or card terminal, an exit button and the right cabling. Check the lock's voltage and current rating before choosing the supply.
Can a maglock be used on any door?
It works best on solid doors that close flat against the frame, with mounting space on the frame and door. Glass or frameless doors need special brackets. Check the holding force against the door type, and ask a technician if unsure. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock.





