SKU KCS-EXIT-BUTTON

Door Exit Button

KSh 800
In stock — pick up today in Nairobi CBD

A push-to-exit button for access controlled doors in Kenya. Pressing it tells the controller or lock to release the door from the inside, so people can leave without a card or code.

  • Push button releases the door lock
  • For access control doors
  • Simple two-wire connection
  • Used on the inside of the door
How our access control installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 3 items KSh 11,800
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A door exit button is a simple push switch fitted on the inside of a controlled door. When someone presses it, the circuit signals the access controller or lock to release, so people can leave freely while the outside still needs a card, code or key.

Key features

The button is a momentary switch: it closes the circuit only while pressed, and the controller then opens the lock for a short, programmable time.

  • Push-to-exit operation.
  • Wired to the controller's exit input or in the lock circuit.
  • Used with electric locks, drop bolts and magnetic locks.
  • Fits beside the door on the inside wall.

Where to use it

Exit buttons are used at office entrances, shop back doors, apartment gates, server rooms, clinics and any other door where entry is controlled but leaving should be easy. They are normally fitted at about hand height near the door handle, on the inside.

Installation and setup

Fix the button to a wall or door frame with the screws or surface box that suit your wall. Run two cores of low-voltage cable back to the controller. Connect them to the exit or button input, usually marked as exit, REX or push, and common. Test that the lock releases and then relocks.

Some installations wire the button straight into the lock power circuit. Follow the controller's manual to choose the correct method and to set the release time. Exit buttons are not a replacement for an emergency release, which is a separate device.

Choosing and safety

Check that the colour, mounting style and wiring terminals suit your door. In places where a fire exit is required, add an emergency break glass release so people can always leave if the power fails. Local building and fire rules apply to escape doors, so check them or ask an installer.

What you need with it

The exit button is one part of a door system:

  • An access controller or keypad.
  • An electric lock, drop bolt or magnetic lock.
  • A 12 V access control power supply.
  • Low-voltage cable, and an emergency break glass release where needed.

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. You can collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, have it delivered within Nairobi (up to 45 km), or ordered by courier across Kenya in 1 to 3 working days.

Frequently asked questions

What does an exit button do?

It lets people leave a controlled door without a card or code. Pressing it sends a signal to the controller, which releases the lock for a short time set during programming. Our team at the Kefa CCTV Shop on Moi Avenue, Nairobi can advise on the right choice for your job, and on the unit currently in stock, before you buy.

Is an exit button enough for a fire exit?

No. Escape doors have legal requirements, and an emergency release is a separate device. Add an emergency break glass release, and check local requirements with a qualified installer. Our team at the Kefa CCTV Shop on Moi Avenue, Nairobi can advise on the right choice for your job, and on the unit currently in stock, before you buy.

How is it wired?

Usually two cores run from the button to the exit input on the controller, plus common. The terminals vary, so follow the controller's manual and test before closing up. Our team at the Kefa CCTV Shop on Moi Avenue, Nairobi can advise on the right choice for your job, and on the unit currently in stock, before you buy.

Can you install it for me?

Yes. Kefa Solutions technicians install access control in Nairobi and across Kenya. Contact the Kefa CCTV Shop on Moi Avenue for details. Our team at the Kefa CCTV Shop on Moi Avenue, Nairobi can advise on the right choice for your job, and on the unit currently in stock, before you buy.

KSh 800 In stock