
CCTV Video Balun
A video balun lets a coaxial-style CCTV camera send its picture over twisted-pair cable such as Cat5e or Cat6, and converts it back at the recorder. Baluns are normally used in pairs, one at each end of the run. They are common in Kenyan installs that reuse network cable.
- Carries camera video over twisted-pair cable
- Fitted as a matched pair, one at each end
- Lets you use network cable instead of coax
- Small body fits junction boxes
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A CCTV video balun is a small adaptor that changes the video signal from a camera into a form that travels over twisted-pair cable, then changes it back at the other end. The word comes from "balanced to unbalanced", which describes the conversion between coax-style video and a twisted pair.
How a video balun is used
Each camera run needs a balun at the camera end and another at the recorder end. The camera plugs into its balun by a BNC connection, and the balun connects to the twisted-pair cable by screw terminals or a network-style socket, depending on the model. The far-end balun then passes the picture on to the recorder.
Key features
- Carries camera video over twisted-pair cable
- Used as a matched pair, one at each end
- Lets you reuse or choose network cable instead of coax
- Compact enough to sit in a junction box or behind a recorder
Where to use it in Kenya
Baluns are useful when a building is already cabled with Cat5e or Cat6, when twisted-pair is easier to pull through ducts than coax, or when several camera runs share one multi-pair cable. Installers in Nairobi apartments and offices often meet this situation when upgrading an older system.
Installation and setup
Connect the camera to the balun with a short coax lead, terminate the twisted pair into the balun, and repeat at the recorder end. Keep the pair of conductors used for video together and use the same colour order at both ends. Test the picture before closing up the cable route. Keep the cable away from mains wiring to limit interference.
What you need with it
- Twisted-pair cable, such as Cat5e or Cat6
- Two baluns per camera, and short BNC leads
- A camera and recorder that take a coax-style video signal
Our team can tell you whether the balun in stock is a passive type and how it connects to cable. Ask at the Kefa CCTV Shop on Moi Avenue, Nairobi. We deliver within Nairobi and send by courier across Kenya.
Frequently asked questions
Do I need two baluns per camera?
Yes. One balun goes at the camera end to convert the video for the twisted pair, and a second at the recorder end to convert it back. The two work as a matched pair, so always buy them in even numbers for the cameras you plan to connect.
Can I use Cat6 cable with a video balun?
Yes. Video baluns are designed to send the picture over twisted-pair cable such as Cat5e or Cat6. Keep the pair used for video together and wire it the same way at both ends. Check the balun instructions for the maximum distance of your type.
Will a balun work with an IP camera?
No. A video balun is for cameras that send an analogue or HD-over-coax video signal over coax-style connections. IP cameras connect straight to a network switch or PoE recorder with network cable, and they do not need a balun at all.