Cat6 Outdoor Cable V2
Cat6 outdoor cable V2 is network cable of the outdoor type, used where an Ethernet run has to leave the building to reach an external IP camera, access point or another building. It carries data and PoE power over Cat6 twisted pairs in Kenyan compounds.
- Cat6 twisted-pair cable of the outdoor type
- Suits external IP camera and access point runs
- Can carry PoE to supported devices
- Links outbuildings and gatehouses to the main network
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
Cat6 outdoor cable is Cat6 twisted-pair network cable made for runs outside a building. This item is the V2 version in our stock. It does the same job as indoor Cat6, carrying gigabit Ethernet and PoE power to devices, but it is built for the outside conditions that indoor cable is not designed for.
Why outdoor cable
Indoor network cable is meant for sheltered runs inside a building. Outside, a cable faces sun, rain and temperature swings, which can damage an unsuitable jacket over time. Outdoor-type cable is made for those conditions, so it is the sensible choice for gate posts, perimeter walls and any run across open ground.
Key features
- Cat6 category twisted pairs
- Outdoor type of network cable
- Carries data and PoE to supported devices
- One cable type for IP cameras, access points and links between buildings
Where to use it in Kenya
Use it to feed IP cameras mounted on external walls and poles, to link a gatehouse or guard room to the main building, or to carry a network to a detached office or workshop. In a Nairobi estate or industrial yard, an IP camera on the perimeter needs one outdoor run back to an indoor switch or recorder.
Installation and setup
Do not exceed about 100 metres from switch to device on a normal Ethernet link. Support the cable with clips or conduit, avoid sharp bends and keep it away from mains cable. Where it enters a building or camera housing, make a drip loop so water runs off before it reaches the entry point. Terminate with suitable connectors, test the run with a cable tester, and label both ends.
What you need with it
- RJ45 plugs or keystone jacks, with a crimp or punch-down tool
- Clips or conduit for the route
- A PoE switch or recorder and the devices to connect
- A cable tester
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification and roll length available. We deliver within Nairobi and send by courier across Kenya.
Frequently asked questions
When should I use outdoor Cat6 cable?
Use it wherever the cable leaves the building or is exposed to sun and rain, such as runs to cameras on walls or poles, between buildings or across a yard. Indoor Cat6 is meant for sheltered routes and is not suited to those conditions.
How far can a Cat6 cable run?
For standard Ethernet, a single Cat6 run can be up to about 100 metres between the switch and the device, including patch cords. Beyond that you need a switch or extender part way along. Plan the cable route and measure it before you buy.
What does V2 mean?
V2 is the label used for this version of the cable in our stock. We do not have a manufacturer's datasheet for it, so please ask our Nairobi team about its construction before you rely on it for a long or demanding run.

