SKU KCS-CAT6-BGT5

Cat6 Network Cable BGT5

KSh 50 per metre
In stock — pick up today in Nairobi CBD

This is a Cat6 category network cable supplied under the code BGT5. Cat6 cable carries Ethernet data and power for IP cameras, access points and computers in Kenyan homes, shops and offices. Our team can confirm the exact construction of the cable in stock.

  • Cat6 twisted-pair network cable
  • Carries data to IP cameras and switches
  • Can feed PoE devices on supported gear
  • One cable type for CCTV and office networks
How our CCTV installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 4 items KSh 4,500
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

Our cat6 bgt5 cable is a Cat6 category network cable, sold under the code BGT5. Cat6 is the standard twisted-pair cable for modern wiring: it carries Ethernet data between IP cameras, recorders, switches, routers and computers, and it can also carry power to PoE cameras.

What Cat6 means

Cat6 is a category of twisted-pair cable built for gigabit Ethernet. The pairs inside are twisted to reduce interference, which keeps the signal stable over a run. For ordinary Ethernet the maximum length of one run is about 100 metres, and shorter is better for a margin.

Key features

  • Cat6 twisted-pair network cable
  • Carries data to IP cameras, switches and access points
  • Can feed PoE devices where the equipment supports it
  • One cable type for both CCTV and office network wiring

Where to use it in Kenya

Use Cat6 to connect IP cameras to a PoE switch or recorder, to link an access point to a router, or to wire desks and TVs in an office. For a new Nairobi shop or home, running Cat6 at the cabling stage is cheaper than adding it later.

Installation and setup

Pull the cable gently and avoid sharp bends or kinks, since damaged pairs lower performance. Keep it away from mains cable where possible. Terminate each end with RJ45 plugs or Cat6 keystone jacks in the same colour order, then test the run with a cable tester before you connect the equipment. Label both ends.

What you need with it

  • RJ45 plugs or Cat6 keystone jacks, with a crimp tool
  • A cable tester
  • Clips or trunking to fix the cable
  • An IP camera, switch or recorder to connect

Before you buy

This item is recorded under the code BGT5 only, so details such as whether it is for indoor or outdoor use, and how it is sold, need checking. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the cable in stock before you commit to a long run.

Frequently asked questions

What is Cat6 cable used for?

Cat6 carries Ethernet data and, on supported equipment, PoE power. In CCTV it links IP cameras to a PoE switch or recorder. In offices and homes it connects routers, access points, computers and TVs over runs of up to about 100 metres.

Can I use it outdoors?

That depends on the construction, and the code BGT5 on its own does not tell us. Indoor cable is not designed for sun and weather. Please ask our Nairobi team whether this cable is rated for outdoor use before running it outside.

What do I use to terminate it?

Use RJ45 plugs with a crimp tool, or Cat6 keystone jacks in a patch panel or wall plate. Keep the same colour order at both ends, then test with a cable tester before you plug in a camera, switch or recorder.

KSh 50 In stock