SKU KCS-CAT6-KEYSTONE

Cat6 Keystone Jack Module

KSh 300
In stock — pick up today in Nairobi CBD

A Cat6 keystone jack is a small socket module that snaps into a wall plate or patch panel. The Cat6 cable is punched down into it, and a patch cord then plugs into the front. It is the standard way to finish network points in Kenyan offices, homes and CCTV rooms.

  • Cat6 module with RJ45 socket on the front
  • Snaps into wall plates and patch panels
  • Fixes permanent cable at the wall
  • Easy to label and re-patch
How our CCTV installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 4 items KSh 4,750
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A Cat6 keystone jack is a small module with an RJ45 socket on the front and wire terminals at the back. You punch the solid-core Cat6 cable into the back, snap the module into a wall plate, faceplate or patch panel, and you have a neat network socket instead of a loose plug.

Why use keystone jacks

Solid network cable in a wall can break if it is plugged directly into equipment and moved around. A keystone jack fixes the permanent cable at the wall, and a flexible patch cord does the moving. This makes a tidier install and an easier repair: change the patch cord, not the cable in the ceiling.

Key features

  • Cat6 module with an RJ45 socket at the front
  • Snaps into compatible wall plates and patch panels
  • Cable is terminated at the back by punch-down or similar
  • Keeps permanent cabling away from handling

Where to use it in Kenya

Use keystone jacks at desks, wall points for TVs and access points, and on patch panels in a small comms cabinet. For CCTV, they are handy where IP camera cables arrive at a rack or NVR cupboard and need to be labelled and patched to a switch.

Installation and setup

Strip back only the amount of jacket the module needs, untwist the pairs as little as possible, and lay each conductor in the position shown by the colour code marked on the module. Follow the same wiring standard throughout the job so that both ends of every cable match. Snap the module into the plate, fit it to the wall box or panel, then test each point with a cable tester.

What you need with it

  • Cat6 cable of the solid-core type, and a punch-down tool if the module needs one
  • Wall plates, faceplates or a patch panel that take keystone modules
  • Patch cords to connect equipment
  • A cable tester

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi about the exact module in stock. We deliver within Nairobi and send by courier across Kenya.

Frequently asked questions

What is a keystone jack?

A keystone jack is a small module that snaps into a wall plate or patch panel. Cable is terminated on the back, and a patch cord plugs into the RJ45 socket on the front. It gives you a tidy, replaceable socket instead of a plug on solid cable.

Do I need a special tool to fit it?

Most keystone jacks need a punch-down tool or a small tool supplied with the module to seat the wires, plus a cable stripper. Some have tool-less caps. Our Nairobi team can tell you which type the module in stock is.

Will a Cat6 jack work with Cat5e cable?

Yes, the jack will work with Cat5e cable, but the link only performs as well as its weakest part. For a Cat6 run, use Cat6 cable, Cat6 jacks and Cat6 patch cords throughout. Mixing categories lowers the rating of the whole link.

KSh 300 In stock