
4-Core Alarm Cable
4-core alarm cable carries four separate conductors in one jacket, enough for a typical alarm sensor or keypad that needs two wires for power and two for signal. It is used for door contacts, motion detectors and sirens in Kenyan security installs.
- Four insulated cores inside one outer jacket
- Power and signal for a simple alarm device
- Suits contacts, detectors, keypads and sirens
- Spare cores give room for later changes
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
4 core alarm cable holds four insulated conductors inside a single outer jacket. For alarm work, four cores is the usual choice for the simplest runs: two conductors to power a device and two to carry its alarm signal back to the panel. It keeps wiring neat, because one cable does the work of four loose wires.
What the four cores are used for
A motion detector or glass-break sensor normally needs power and an alarm contact, which suits four cores. A passive magnetic contact needs only two, so a 4-core cable gives you spare cores for a tamper circuit or a later change. A siren, strobe or small keypad can also be run on four cores.
Key features
- Four conductors in one jacket
- Individually insulated cores make connection to terminals easier
- Suits short and medium runs between sensors and the panel
- A tidy alternative to running several single wires
Where to use it in Kenya
Use it on door and window contacts, PIR motion sensors, shock sensors and sirens in homes, shops and offices. For a plan with many sensors, run 4-core to each simple device and move up to 6-core or 8-core where one cable must carry more functions.
Installation and setup
Route the cable away from mains cables where you can, or cross them at right angles, to avoid interference. Fix it with clips at regular spacing, leave a little slack at each device and strip only as much jacket as the terminal needs. Note which colour is used for which function and write it down for the next technician. Test each zone at the panel before covering the cable.
What you need with it
- Cable clips to fix it along walls and frames
- Terminal screwdrivers for the panel and sensors
- Sensors and a control panel for the cable to connect
This item may be sold by the metre or by the roll, so ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi how it is sold. We deliver within Nairobi and send by courier across Kenya.
Frequently asked questions
What is 4 core alarm cable used for?
It connects alarm devices to the control panel. Four cores usually allow two wires for power and two for the alarm signal, which suits motion detectors, shock sensors, sirens and keypads. Simple door contacts need fewer wires, so the spare cores give you flexibility.
When should I choose 6-core or 8-core instead?
Choose a higher core count when one cable needs to carry more functions, such as power, alarm, tamper and extra outputs, or when you want spare cores for future changes. For simple sensors on short runs, 4-core is normally enough.
Is it sold by the metre or by the roll?
This needs confirming for the item in stock. Please ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi how it is sold and what length you need for your site, so you buy enough to cover the run with some spare.