
VGA Video Splitter VGA-2004
The VGA-2004 is a VGA video splitter: it takes the VGA output of one computer or CCTV recorder and shows the same picture on several VGA monitors or projectors at once. It suits offices, schools, showrooms and security rooms in Kenya that want one source on more than one screen.
- One VGA source on several screens
- For CCTV recorders, computers and media players
- Same picture on every output
- Each screen gets its own driven signal
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The VGA-2004 vga splitter solves a simple need: one source, several screens. A computer, CCTV recorder or media player sends its VGA picture into the splitter, and each output carries the same picture to its own monitor or projector. Splitter boxes of this kind are powered, so each screen gets its own driven signal instead of sharing a weakened one.
Where a VGA splitter is used
- CCTV: one DVR's VGA output shown in the security office, the manager's office and at reception.
- Classrooms and training rooms: the trainer's computer on a projector and on monitors along the rows.
- Showrooms and shops: the same advert or menu display on several screens.
- Banking halls and offices: queue information or notices on more than one monitor.
What it does and does not do
- Every connected screen shows the same picture; it cannot show different content on each.
- It works in one direction: one source in, screens on the outputs.
- VGA carries no sound, so audio must be handled separately.
- It does not convert between VGA and HDMI; use an adapter for HDMI screens.
Setting it up
Place the splitter close to the source and a power socket. Connect the source's VGA output to the splitter input with a short VGA cable, then run a VGA cable from each output to its screen. Switch on the screens, power the splitter and start the source last. Set the source to a resolution that every connected screen supports, and press auto-adjust on each monitor or projector.
Planning the cable to each screen
Each screen has its own cable, and VGA pictures soften over long runs. Keep the nearest screens on short leads, and measure the routes to distant screens carefully. Label each output and cable end with the screen it feeds so faults are quick to trace.
Troubleshooting
If one screen is blank or tinted while the others work, swap its cable with a working output to see whether the fault is the cable, the screen or the port. If all screens are blank, check the splitter's power and the input cable first.
What you need with it
- One short VGA cable for the input.
- One VGA cable per screen, sized to each route.
- A power socket next to the splitter.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including its number of outputs.
Frequently asked questions
Can each monitor show a different camera or program?
No. A splitter copies one picture, so every screen shows exactly what the source sends. If the CCTV recorder shows a four-camera layout, every monitor shows that layout. For different content on each screen, you need separate sources, or a recorder with more than one independent output, or the cameras viewed on a computer in the second location.
Does splitting the signal make the picture weaker?
A powered splitter drives each output separately, so the screens do not share a weakened signal the way a simple Y-cable does. The picture on each screen then depends mainly on the cable to it: short runs stay sharp, long runs soften. Set a resolution all screens support and use auto-adjust on each one.
Can I use it with my DVR's VGA output?
Yes. Many DVRs and NVRs have a VGA output. Connect it to the splitter input and run a cable from each output to a monitor, for example in the guard room, the office and at reception. If the recorder also has HDMI, you may be able to use that for one more screen without the splitter.