Fenus Tilting TV Wall Mount 15–43 inch FS 20T
The Fenus FS 20T is a tilting wall mount for flat-panel TVs and monitors from 15 to 43 inches. It fits VESA hole patterns of 75 × 75, 100 × 100 and 200 × 200 mm, holds up to 25 kg and tilts ±15° to cut glare. A simple, low-cost bracket for homes, offices and shops in Kenya.
- Fits most 15–43 inch flat-panel TVs
- VESA 75 × 75, 100 × 100 and 200 × 200 mm
- Holds up to 25 kg
- Tilts ±15° to reduce glare
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Fenus FS 20T is a tilting 43 inch TV wall mount for flat-panel screens from 15 to 43 inches. It lifts the TV off the stand or table, saves space and lets you angle the screen down by up to 15° or up by up to 15° to reduce reflections from windows and lights.
Key features
- Screen size: fits most 15–43 inch flat-panel TVs, as printed on the box.
- VESA patterns: 75 × 75 mm, 100 × 100 mm and 200 × 200 mm.
- Load capacity: up to 55 lb (25 kg).
- Tilt: ±15°.
- Universal fit for LED, LCD and plasma screens that use one of the listed VESA patterns.
Where to use it
This size of bracket suits bedroom and kitchen TVs, small living-room TVs, reception screens, monitors used for CCTV viewing and menu or price displays in shops and restaurants. Tilting is useful when the TV is mounted a little above eye level, such as over a counter or a cabinet, because you can angle the screen down towards the viewers.
Check before you buy
Look at the back of your TV for four threaded holes and measure the distance between them, side to side and top to bottom, in millimetres. If the spacing is 75 × 75, 100 × 100 or 200 × 200 mm and the TV weighs no more than 25 kg, this mount is a match. The TV's manual or the label on the back also lists its VESA size and weight. If your screen uses another pattern, ask our team for a bracket that fits.
Installation tips
- Fix the wall plate to solid masonry or a strong stud, using fixings suited to your wall type.
- Use a spirit level so the TV hangs straight.
- Plan where the power socket and the antenna, decoder or HDMI cables will run before drilling.
- Choose the screw length carefully so screws do not go too deep into the TV.
For an exact list of the screws and fixings supplied, ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi. You can collect the mount from the shop in Nairobi CBD, get delivery within Nairobi (up to 45 km), or order by courier anywhere in Kenya in 1–3 working days.
Frequently asked questions
Will this mount fit my TV?
It fits most flat-panel TVs from 15 to 43 inches that use a VESA hole pattern of 75 × 75 mm, 100 × 100 mm or 200 × 200 mm and weigh up to 25 kg. Measure the spacing of the four screw holes on the back of the TV, or check its manual. If the pattern is different, ask us for another bracket.
Can I angle the TV downwards?
Yes. The FS 20T tilts by up to 15° forwards or backwards. This helps when the TV is mounted above eye level, for example over a counter or a cabinet, and it reduces reflections from windows and ceiling lights. It does not swing left or right, so mount it facing the main seating area.
What wall is it suitable for?
A wall mount is only as strong as the wall and fixings behind it. Fix it to solid masonry such as stone, brick or block, or into a strong timber stud, using fixings that suit the wall. Avoid hanging a TV on thin partition board alone. If you are unsure, ask a qualified fitter to install it.
Is this mount suitable for a 50 inch TV?
No. The FS 20T is made for screens from 15 to 43 inches with VESA patterns up to 200 × 200 mm. Larger TVs usually use wider hole patterns and weigh more. For a bigger screen, look at the Fenus FS 42T for 15–55 inch TVs or ask our team for a mount rated for your TV.