UHF TV Aerial UHF-802
The UHF-802 is a UHF TV aerial for receiving free-to-air digital television. In Kenya, free-to-air TV is broadcast in the UHF band, so a UHF aerial connected to a TV with a digital tuner, or to a free-to-air decoder, picks up the channels available in your area without a monthly subscription.
- UHF aerial for free-to-air digital TV
- Works with digital TVs and free-to-air decoders
- No subscription for free-to-air channels
- Point towards your local transmitter
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A UHF TV aerial is what a TV needs to receive broadcast channels over the air. Free-to-air digital television in Kenya is transmitted in the UHF band, and the UHF-802 is an aerial for that band. Connected to a TV with a digital tuner, or to a free-to-air decoder, it lets you watch the channels that reach your area without a subscription.
What you need for free-to-air TV
- An aerial, such as the UHF-802, to pick up the signal.
- A digital tuner, built into the TV or in a separate free-to-air decoder (set-top box).
- Coaxial cable from the aerial to the TV or decoder, with the right plug for its aerial socket.
Pay-TV services use their own decoders and, for satellite services, a dish. This aerial is for terrestrial broadcasts.
Placing and pointing the aerial
Signal strength depends on your distance from the transmitter and on what lies between: hills, tall buildings and metal roofs all weaken it. As a general rule, higher is better, and an aerial outside on a pole usually receives more than one inside the house.
- Point the aerial towards the transmitter that serves your area. Neighbours' aerials are a good guide to the right direction.
- Mount it clear of metal roofing sheets, water tanks and walls in the line of sight.
- Use the shortest practical cable run, with good connectors at each end.
- Seal outdoor connections against rain so water does not enter the cable.
Tuning in
Connect the cable, switch on the TV or decoder and run an automatic channel scan from its menu. Most decoders and digital TVs show a signal strength or quality bar; turn the aerial slowly and pause between moves, watching the bar, then scan again in the strongest position. Channels come in groups from each transmitter, so moving the aerial can bring in some channels and lose others.
If the signal is weak
Try a higher position first, then check the cable and connectors for damage or corrosion. In areas far from a transmitter, a signal amplifier may help, but it cannot fix an aerial pointed the wrong way.
What you need with it
- Coaxial cable and connectors for the run to the TV.
- A pole or wall bracket if mounting outside.
- A free-to-air decoder if your TV has no digital tuner.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including whether it is for indoor or outdoor use.
Frequently asked questions
Do I need a decoder with this aerial?
Only if your TV has no built-in digital tuner. Kenyan free-to-air broadcasts are digital, so the signal must be decoded by a digital tuner. Many newer TVs have one built in; check the TV's specification or menu for a digital or antenna channel search. If yours does not, connect the aerial to a free-to-air decoder and the decoder to the TV.
Which channels will I get?
That depends on where you are and which transmitters reach you. In and around major towns most of the main free-to-air channels are usually available, while rural and hilly areas may receive fewer. The only sure way to know is to connect the aerial, point it towards your local transmitter and run a channel scan.
Which way should I point the aerial?
Towards the transmitter that serves your area. The quickest guide is to look at the aerials on neighbouring roofs and point yours the same way. Then fine-tune using the signal strength bar in your decoder or TV menu, moving the aerial a little at a time and waiting a few seconds before each reading.
Why do I get some channels but not others?
Digital channels are sent in groups, and different groups may come from different transmitters or frequencies. A position that picks up one group strongly may miss another. Try small changes in direction and height, rescanning each time, and check that the cable and connectors are sound. A higher, clearer position often brings in the missing channels.