SKU KCS-VGA-COUPLER

VGA to VGA Connector

KSh 200
In stock — pick up today in Nairobi CBD

A VGA to VGA connector joins two VGA cables end to end, so you can extend a run that is just too short without replacing the cable. It is a handy fix for offices, schools, churches and CCTV setups in Kenya when a monitor or projector has moved a little further from the computer or recorder.

  • Joins two VGA cables into one longer run
  • Quick fix when a cable is too short
  • For temporary projector and monitor setups
  • Small enough to keep in an installer's bag

Frequently bought together

Complete your setup in one go
Total for 3 items KSh 7,200
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A VGA to VGA connector is a small joiner that links two VGA cables into one longer run. When a projector moves to the back of a hall for an event, or a CCTV monitor is shifted to the other side of a guard room, it lets you add a second cable instead of buying and pulling a new, longer one.

When it helps

  • Temporary setups: conferences, church events and school functions where a projector is placed further away than usual.
  • Moved monitors: a CCTV monitor relocated across a room, joined to the existing cable with an extra lead.
  • Short built-in leads: some older monitors and projectors have a fixed VGA lead that does not quite reach.
  • Spare kit: installers keep one in the bag for quick fixes on site.

Using it well

  • Plug each cable into the connector fully and tighten both thumbscrews by hand.
  • Make sure the joint is not hanging in the air; rest it on a surface or fix it with a cable tie so its weight does not pull on the plugs.
  • Keep the joint where it can be reached, not buried deep in a ceiling or conduit.
  • After joining, press the auto-adjust button on the monitor or projector.

What a joint does to the picture

VGA is analogue, so the total length of the run matters more than the joint itself. Two short cables joined together behave much like one cable of the same total length. Each joint does add a small loss and another place for a plug to work loose, so for long totals or permanent installations, a single cable of the right length is the more reliable choice.

Same connector on both sides

This connector joins VGA to VGA only. It does not convert between VGA and HDMI. To connect an HDMI device to a VGA screen, or the other way round, use the matching adapter.

Troubleshooting

If the picture has a colour tint or flickers after joining, unplug both cables and check every pin for bends, then reconnect firmly and tighten the screws. Try each cable on its own to find whether one of them is faulty.

What you need with it

  • A second VGA cable of the length you need.
  • Cable ties to support the joint.
  • A single longer cable for permanent installations.

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Delivery is available within Nairobi and by courier across Kenya.

Frequently asked questions

Will joining two VGA cables spoil the picture?

Not noticeably over short totals. Two 1.5 m cables joined together behave much like one 3 m cable. Over long totals, the length itself softens the analogue picture, and each joint adds a small loss. If the joined run looks blurred or has shadows, use the screen's auto-adjust and a slightly lower resolution, or replace both with one cable.

Can I use this to connect an HDMI laptop to a VGA projector?

No. This connector only joins VGA to VGA and does not change the type of signal. An HDMI laptop needs an HDMI to VGA adapter, which converts its digital output to the analogue VGA signal the projector understands. You can then connect a VGA cable from the adapter to the projector, and join on a second cable if needed.

Is it suitable for a permanent installation?

It works, but it is better avoided where a single cable of the right length can be used. A joint hidden in a ceiling or conduit is hard to reach if a plug works loose. If you must use one in a fixed setup, keep it accessible, support it with a cable tie and tighten both thumbscrews firmly.

KSh 200 In stock