Fenus Tilting TV Wall Mount 15–55 inch FS 42T
The Fenus FS 42T is a tilting wall mount for flat-panel TVs from 15 to 55 inches. The box lists VESA hole patterns of 200 × 200, 200 × 400, 300 × 300 and 340 × 410 mm, a load of up to 45 kg and ±15° tilt. It suits living rooms, offices and shops in Kenya with mid-size screens.
- Fits most 15–55 inch flat-panel TVs
- VESA 200 × 200 up to 340 × 410 mm
- Holds up to 45 kg
- Tilts ±15° to reduce glare
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Fenus FS 42T is a tilting 55 inch TV wall mount for flat-panel screens from 15 to 55 inches. It frees floor and table space, keeps the TV out of reach of small children, and tilts up to 15° up or down so you can angle the screen away from reflections.
Key features
- Screen size: fits most 15–55 inch flat-panel TVs, as printed on the box.
- VESA patterns: 200 × 200, 200 × 400, 300 × 300 and 340 × 410 mm.
- Load capacity: up to 99 lb (45 kg).
- Tilt: ±15°.
- Universal fit for LED, LCD and plasma screens that use one of the listed VESA patterns.
Where to use it
This bracket suits the main TV in a living room, a 43–55 inch screen in a boardroom, school hall or waiting area, and display screens in shops, bars and restaurants. Tilting is helpful when the TV is mounted higher than eye level, because you can angle the screen down towards the seats.
Check before you buy
The FS 42T uses wider hole patterns than small-TV brackets. Measure the spacing of the four threaded holes on the back of your TV, side to side and top to bottom, in millimetres. If it is one of 200 × 200, 200 × 400, 300 × 300 or 340 × 410 mm and the TV weighs no more than 45 kg, this mount is a match. Many small TVs use 75 × 75 or 100 × 100 mm, which this bracket does not list; for those, choose the Fenus FS 20T. The VESA size and weight are also in the TV manual or on the label on its back.
Installation tips
- Fix the wall plate to solid masonry or a strong stud, with fixings suited to your wall.
- Use a spirit level so the TV hangs straight.
- Plan cable routes for power, decoder, antenna and HDMI before drilling.
- Have two people lift a large TV onto the bracket.
For the exact screws and fixings supplied, ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi. You can collect it from the shop in Nairobi CBD, get delivery within Nairobi (up to 45 km), or order by courier anywhere in Kenya in 1–3 working days.
Frequently asked questions
Will the FS 42T fit my 55 inch TV?
It will if the TV's VESA hole pattern is 200 × 200, 200 × 400, 300 × 300 or 340 × 410 mm and the TV weighs no more than 45 kg. Measure the spacing of the four screw holes on the back or check the TV manual. Some 55 inch TVs use 400 × 400 mm, which this bracket does not list.
Can I use it for a small 32 inch TV?
The box covers screens from 15 inches, but the bracket only lists VESA patterns from 200 × 200 mm upwards. Many smaller TVs use 75 × 75, 100 × 100 or 200 × 200 mm holes, so check yours. If your TV uses 75 × 75 or 100 × 100 mm, the Fenus FS 20T is the better match.
How far can it tilt?
The FS 42T tilts by up to 15° forwards or backwards. That helps when the TV is above eye level and when windows or lights cause reflections on the screen. It does not swing left or right, so mount it facing the main seating area. For pulling a large screen out from the wall, ask about an arm-type mount.
What wall is it suitable for?
Fix it to solid masonry such as stone, brick or block, or into a strong timber stud, with fixings suited to the wall and the weight of your TV. Thin partition board alone will not hold a mid-size TV safely. If you are unsure, ask a qualified fitter to check the wall and install the bracket.