TP-Link Model TL-POE150S SKU KCS-TPLINK-TL-POE150S

TP-Link Gigabit PoE Injector 802.3af TL-POE150S

KSh 2,500
In stock — pick up today in Nairobi CBD

The TP-Link TL-POE150S is a single-port gigabit PoE injector that adds IEEE 802.3af power to a normal network cable. It lets you power one IP camera, access point or IP phone from a non-PoE switch or router, up to 100 metres away, with no setup. A simple fix for CCTV and Wi-Fi jobs in Kenya.

  • Adds 802.3af PoE to one network cable
  • Gigabit data in and power-plus-data out ports
  • Powers devices up to 100 m away
  • Works out the power each device needs
  • Plug and play, no configuration
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

The TP-Link PoE injector TL-POE150S adds power to an ordinary network cable, so a single IP camera, Wi-Fi access point or IP phone can run without a power socket near it. Connect your switch or router to the data-in port, connect the device to the power-and-data-out port, and the injector sends both data and power down one cable. It is a common way to add one PoE device to a network in Kenya when you do not need a full PoE switch.

Key features

  • IEEE 802.3af compliant: works with 802.3af PoE devices and PoE receiver adapters.
  • Gigabit speed: both RJ45 ports run at 10/100/1000 Mbps with auto-negotiation.
  • Up to 100 metres: delivers power and data over cable runs up to 100 metres.
  • Automatic power detection: works out the power the connected PoE device needs.
  • Plug and play: no software or configuration.
  • Compact: 110 × 57 × 35.7 mm, with a power LED.

Where to use it

Use the TL-POE150S to add one IP camera at a gate, car park or ceiling where there is no socket, to power a ceiling-mounted Wi-Fi access point, or to run an IP phone on a desk far from the wall outlet. It also helps when an NVR's PoE ports are all in use and you need power for one more camera. The injector itself is for indoor use, at -5 to 40 °C, so place it next to your switch or router and run only the cable outdoors.

Installation and setup

Plug the 48 V power adapter into the injector and a wall socket. Run a patch cable from your switch, router or NVR to the LAN IN port. Run a Cat5e or Cat6 cable, up to 100 metres, from the PoE OUT port to the camera or access point. The PWR LED shows that the injector has power. Check that the device you are powering supports IEEE 802.3af before connecting it.

What you need with it

  • An 802.3af PoE device, such as an IP camera or access point
  • Cat5e or Cat6 cable and RJ45 connectors
  • A switch, router or NVR with a free LAN port

Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order for delivery within Nairobi or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

Can I use this injector to power an IP camera?

Yes, as long as the camera supports IEEE 802.3af PoE, which most fixed IP cameras do. Connect the injector's LAN IN port to your switch, router or NVR, then run one cable from the PoE OUT port to the camera. The camera receives power and network data on the same cable, up to 100 metres away.

Do I need a PoE switch if I use this injector?

No. The injector is the power source, so any ordinary switch, router or NVR LAN port can provide the data side. It is a good choice when you have only one or two PoE devices. If you plan to power four or more cameras from the same place, a PoE switch is usually tidier, with fewer adapters and sockets to manage.

Does it slow down my network speed?

No. Both ports support 10, 100 and 1000 Mbps, so the injector passes gigabit traffic through without reducing speed. It is suitable for high-resolution IP cameras and fast Wi-Fi access points. The actual speed depends on the connected switch and device, and on using good-quality Cat5e or Cat6 cable.

Can I mount the injector outdoors?

No. The injector is an indoor device rated for -5 °C to 40 °C and up to 90% non-condensing humidity. Place it next to your router, switch or NVR in a dry place, and run only the network cable outdoors to the camera. Use outdoor-grade cable for runs exposed to the sun and rain.

KSh 2,500 In stock