Model LS-JB0102B-AT SKU KCS-POE-EXTENDER-1-2

PoE Extender 1-In 2-Out LS-JB0102B-AT

KSh 2,500
In stock — pick up today in Nairobi CBD

The LS-JB0102B-AT is a PoE extender with one PoE input and two PoE outputs. Placed partway along a long network cable, it lets you reach IP cameras beyond the normal 100-metre Ethernet limit and connect two cameras at the far end, powered entirely from the PoE switch or NVR back at the building.

  • One PoE input feeds two PoE outputs
  • Extends a cable run past 100 metres
  • No mains power needed at the extender
  • Saves a second long cable to two cameras
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

The LS-JB0102B-AT is a 2 port poe extender, one in and two out: a small unit that receives power and data on one network cable and passes both on to two devices. Its job is to solve two common problems on larger compounds at once, distance and an extra camera, without running mains power to the middle of the cable route.

Why you need an extender

A single Ethernet cable run is designed for up to 100 metres. Beyond that, video drops out, cameras restart or they never connect. A PoE extender placed before the 100-metre point starts a fresh segment, so the cable can continue on to the cameras. Because it takes its own power from the incoming PoE, there is no need for a socket at the extender's location, which is useful along a boundary wall, a driveway or between buildings.

  • One PoE input, two PoE outputs.
  • Powered from the incoming PoE cable.
  • No mains socket needed at the extender.
  • Model code LS-JB0102B-AT.

Where to use it

The 1-in 2-out layout suits places where two cameras sit close together far from the recorder: a main gate with one camera on the approach and one on the gate itself, two corners of a distant boundary, or a parking area and a store at the far end of a plot. One cable from the PoE switch or NVR feeds both, saving a second long cable run.

Power budget

The extender does not create power; it shares what it receives. The two cameras together, plus the extender's own consumption, must stay within what the PoE port feeding it can deliver. Small fixed cameras are usually fine. Cameras with strong illumination, PTZ cameras or heaters may need a higher-power port or a separate supply. Check the camera ratings before installing.

Installation and setup

Mount the extender in a weatherproof junction box or indoors, keeping water away from the ports. Connect the cable from the PoE switch or NVR to the input port, then cable each camera to an output. Use good quality, solid-conductor network cable and crimp the connectors carefully, because poor terminations cause most PoE faults. Kefa Solutions technicians can install IP camera systems.

Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order delivery within Nairobi or by courier across Kenya.

Frequently asked questions

How far can I reach with a PoE extender?

Each Ethernet segment is designed for up to 100 metres, and the extender starts a new segment, so the camera can sit further away than a single cable allows. How far in total also depends on cable quality and how much power the cameras need, because every metre of cable loses some voltage.

Does the extender need its own power supply?

No. It is powered by the PoE coming in from the switch or NVR, and passes the remaining power on to the cameras. That is why it can be fitted along a wall or in a pole box with no socket nearby. The feeding port must provide enough power for both cameras and the extender.

Can I use it with a non-PoE switch?

Not on its own. The extender needs PoE on its input. If your switch has no PoE, add a PoE injector between the switch and the cable, making sure its PoE type matches the extender and cameras. Using a PoE switch or a PoE NVR is the simpler option.

KSh 2,500 In stock