Tilting TV Wall Mount for 15 to 42 inch Screens HT-001
The HT-001 is a tilting wall mount for flat panels from 15 to 42 inches. Its tilt lets you angle a small TV or monitor down when it is mounted high, which suits bedrooms, kitchens, guard houses and shops in Kenya, and CCTV monitors placed up on the wall where the guard can see them.
- Tilting mount for 15 to 42 inch screens
- Angles high-mounted screens down towards viewers
- Suits small TVs and CCTV monitors
- Cuts glare from windows and lights
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The HT-001 tilting tv wall mount is made for smaller flat panels, from 15 to 42 inches. A tilting mount lets you angle the screen forward and down, which matters whenever the TV or monitor sits above eye level: the picture faces the viewer instead of the ceiling, and reflections from windows and lights move out of the way.
Small screens, high places
- Bedrooms: a 24 or 32-inch TV mounted high on the wall opposite the bed, tilted down towards the pillows.
- Kitchens: a small TV above the counter, clear of cooking and out of reach of children.
- Guard houses and gatehouses: a CCTV monitor or small TV fixed above the desk, angled towards the seated guard.
- Shops, salons and kiosks: a screen up near the ceiling for adverts or TV, visible over the counter.
Using it for CCTV monitors
The 15-inch lower limit means the HT-001 also suits many computer monitors, as long as they have mounting holes on the back. In a guard booth, a wall-mounted monitor frees the small desk for the logbook and radio, and tilting it down cuts the glare from the booth window during the day.
Before you buy
- Check that the screen is between 15 and 42 inches.
- Look for four threaded mounting holes on the back of the TV or monitor and measure their spacing.
- Check the screen's weight against the mount's rated load.
- Make sure the cables can still plug in once the screen is close to the wall.
Installation tips
Fix the wall plate into solid block or concrete with plugs and screws suitable for the wall, using a spirit level. Fit the parts that attach to the TV while it lies face down on a soft surface, then hang the TV on the wall part and lock it in place as the instructions describe. Set the tilt with the TV in position, while someone sits where the viewer will be. Plan the power socket and cable route before drilling, so cables do not dangle below the screen.
What you need with it
- Wall plugs and screws suited to your wall.
- Cable trunking for a tidy finish.
- An HDMI or VGA cable long enough to reach the recorder or decoder.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including its hole spacing range and load rating. Delivery is available within Nairobi and across Kenya.
Frequently asked questions
Can I mount a computer monitor with the HT-001?
Yes, if the monitor is 15 inches or larger and has four threaded mounting holes on the back whose spacing suits the mount. Many office monitors have these holes behind a removable stand. Some budget monitors do not, and those cannot be wall-mounted with a bracket like this. Check the back of the monitor before buying.
Why choose a tilting mount over a fixed one?
A tilting mount is worth it when the screen sits above eye level, such as in a bedroom, kitchen, shop or guard booth. Angling it down points the picture at the viewers and reduces reflections from windows and ceiling lights. If the screen sits at seated eye level, a fixed mount works equally well and sits closer to the wall.
Will it hold a 43-inch TV?
No. The HT-001 is for screens from 15 to 42 inches. A 43-inch TV is outside that range and will usually be heavier and have wider mounting holes than the mount is made for. For 43 inches and above, choose a mount rated for larger screens, such as one covering up to 55 or 65 inches.