SKU KCS-POE-SPLITTER

PoE Splitter

KSh 600
In stock — pick up today in Nairobi CBD

A PoE splitter separates a Power over Ethernet cable back into a normal network connection and a DC power lead. It lets a camera, access point or other device without built-in PoE receive power and data over one cable from a PoE switch or NVR, a common fix on Kenyan installs where there is no socket at the device.

  • Splits PoE into data and DC power
  • Powers non-PoE devices from a PoE port
  • No socket needed at the camera or device
  • Match output voltage and plug to the device
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A poe splitter is the opposite of a PoE injector. It sits at the device end of the cable, takes in a network cable that carries Power over Ethernet, and gives out two things: a plain network connection and a DC power plug. Devices that have a network port but no PoE can then be powered from a PoE switch or NVR, with no adapter or socket at the device.

When you need one

Many older or lower-cost IP cameras, Wi-Fi routers, access points, card readers and small network devices have a DC power socket but cannot take power over the network cable. If they are mounted somewhere without a socket, such as a gate pillar, a ceiling or a pole, a splitter avoids running a separate power cable or installing a new socket.

  • One PoE input from the switch or NVR.
  • A network output to the device's LAN port.
  • A DC output to the device's power socket.
  • Useful where there is no socket at the device.

Check these before buying

The DC output voltage of the splitter must match the voltage the device needs, and the plug must fit. Many cameras and routers use 12 V, but some small devices use 5 V and others 24 V, so read the label on the device. The power drawn through the splitter must also be within what the PoE port can deliver. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including its output voltage and plug.

Installation and setup

Connect the cable from the PoE switch, PoE NVR or PoE injector to the splitter's input. Plug the splitter's network output into the device's LAN port, and its DC plug into the device's power socket. Mount the splitter in a junction box or indoors, out of the rain, and support the cables so the plugs are not strained. Test the connection before closing up the box.

Where it is used

Typical jobs in Nairobi and across Kenya include powering a non-PoE camera at a gate from a PoE NVR, running a ceiling-mounted Wi-Fi access point from a PoE switch, and powering a door reader in a corridor. Kefa Solutions technicians can install CCTV and access control systems that use PoE.

Frequently asked questions

What is the difference between a PoE splitter and a PoE injector?

An injector sits at the switch end and adds power to a network cable. A splitter sits at the device end and separates that power out again into a DC plug, alongside the network connection. You use an injector when the switch has no PoE, and a splitter when the device has no PoE.

Can I use a PoE splitter with a PoE camera?

There is no need. A PoE camera takes power directly from the network cable. A splitter is only for devices without PoE that need a separate DC power input. Using one on a PoE camera adds an extra connection point without any benefit.

Will a PoE splitter work with my PoE switch?

It will if the splitter supports the same PoE type as the switch and the device's power draw is within the port's budget. Most PoE switches and NVRs sold for CCTV use the standard PoE type. Bring your switch model, and our team at the shop can check compatibility with you.

KSh 600 In stock