
High Speed HDMI Cable 30 m
A 30 m High Speed HDMI cable is a single long HDMI lead for large halls, churches, warehouses and multi-room buildings where the screen is far from the source. It gives a one-cable connection without transmitter boxes, suited to Kenyan venues that run projectors or big TVs from a desk at the back.
- 30 m single HDMI lead for very long runs
- Sold as a High Speed HDTV cable
- For large halls, churches and warehouses
- No powered boxes between source and screen
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 30m HDMI cable is for the long jobs. In a large church, conference hall or warehouse office, the media desk or recorder is often at one end and the projector or screen at the other, and a 30 m route is not unusual once you add the climb into the ceiling. This cable is sold as a High Speed HDTV cable, carrying digital picture and sound over the whole distance with nothing in between.
Where a 30 m run makes sense
- Large worship and conference halls: media desk at the back, projector hanging from the ceiling near the front.
- Warehouses and factories: a recorder in the office showing the yard cameras on a screen at the dispatch area.
- Schools: a computer in the office feeding a screen in the assembly hall.
- Event setups where one cable is laid temporarily from the desk to the stage screen.
The honest view on long HDMI cables
The longer an HDMI cable, the more the picture depends on cable condition, routing and the resolution being sent. Thirty metres works well for many installations, but it leaves less margin than a short lead. That is why we recommend testing it in place, with the real source and screen, before anything is fixed or closed.
- Lay the cable loosely along the planned route and connect both ends.
- Check the picture at the resolution you intend to use, for several minutes.
- If it is stable, fix the cable with gentle bends and no crushing points.
- If it flickers, try a lower output resolution at the source.
When an extender is the better tool
For permanent runs through long conduit, an HDMI extender over network cable is often easier: network cable is thin, pulls easily and gets its plugs fitted after it is through the pipe, while an HDMI cable has to be pulled with its plugs already on. Choose the 30 m cable when you want a single, simple lead without powered boxes.
Handling and storage
- Coil it loosely in large loops, never around your elbow in tight turns.
- Do not stand furniture or equipment cases on it.
- For temporary event use, tape it down under a floor cable cover where people walk.
What you need with it
- A draw wire or fish tape and wide enough conduit for the plug.
- Cable covers for temporary floor runs.
- A projector bracket or TV mount at the screen end.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock.
Frequently asked questions
Will a 30 m HDMI cable work with my projector?
In many halls, yes, provided the source and projector both have HDMI and the route is within the cable's length. Because it is a long run, test it before fixing: connect the laptop or media PC, show content at the resolution you will use and watch for several minutes. If the picture drops out, lower the output resolution or use an HDMI extender.
Is a 30 m cable better than an HDMI extender?
Neither is better in every case. The cable is simpler: no power supplies and no boxes to fail or lose. An extender usually handles longer distances and higher resolutions with more margin, and its network cable is easier to pull through conduit. For a temporary or simple run, the cable is convenient; for permanent installations, many installers prefer an extender.
How do I pull a 30 m HDMI cable through conduit?
Feed a draw wire or fish tape through first. Tape the HDMI plug firmly to it, with the plug lying flat and its edges covered so nothing catches. Pull steadily while someone feeds the cable at the other end without kinks. Make sure every bend and opening is wide enough for the plug before you start.