High Speed HDMI Cable 2 m
A 2 m High Speed HDMI cable gives the extra reach needed when the screen is on the wall and the device is in a cabinet below, or when the computer sits at the other end of the desk. It is a practical length for living rooms, offices and CCTV desks in Kenya.
- 2 m reach for wall-mounted TVs and long desks
- Sold as a High Speed HDMI cable
- Picture and sound in one cable
- Room to route neatly through trunking
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 2m HDMI cable is the length that solves the wall-mounted TV problem. Once a TV goes up on a bracket, its HDMI port is suddenly a metre or more above the decoder or streaming box on the cabinet below, and a short lead no longer reaches. Two metres covers that drop with enough slack to route the cable neatly. This one is sold as a High Speed HDMI cable, carrying digital picture and sound together.
Where 2 m fits
- Wall-mounted TVs with the decoder, streaming box or console on a cabinet underneath.
- Long desks where the computer is at one end and the monitor at the other.
- CCTV setups with the recorder in a low cabinet and the monitor raised on a shelf or bracket.
- Projectors on a table fed from a laptop at the side.
Measuring for a wall-mounted TV
Start at the HDMI port on the back of the TV, run a tape measure down the wall along the route the cable will take, then across the top of the cabinet to the port on the device. Add a little slack at each end for a gentle bend. If the total is about 1.5 m or less, a 2 m cable is the right size. If the device sits to one side of the TV rather than below it, the route grows quickly and a 3 m cable may be needed.
Hiding the cable
For a clean look, run the cable down inside surface trunking painted to match the wall, or through a conduit installed behind the plaster with a wall plate at each end. Fit the cable before mounting the TV, because the HDMI port is hard to reach once the TV is on the bracket.
Connection tips
- Plug in at the TV end first, then route the cable down to the device.
- Do not let the cable hang from the TV port; fix it to the wall or bracket.
- Keep it separate from mains cables inside the trunking.
- Select the correct HDMI input on the TV.
What you need with it
- Trunking or a cable cover for the wall run.
- A TV wall bracket to suit the screen size.
- Cable clips for the cabinet side.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. We also deliver within Nairobi and by courier across Kenya.
Frequently asked questions
Is a 2 m HDMI cable long enough for a TV on the wall?
Usually, when the device sits on a cabinet directly below the TV. Measure from the TV's HDMI port down the wall and across to the device. If that comes to about 1.5 m or less, 2 m leaves enough slack for neat routing. If the cabinet is off to one side, or the TV is mounted high, choose 3 m.
Can I run an HDMI cable inside the wall?
Yes, through a conduit installed behind the plaster, with a wall plate or box at each end. The HDMI plug is wider than the cable, so the conduit and openings must be large enough for it to pass. Put the cable in before the TV is mounted, and test it with the TV and device before closing anything.
Will a 2 m cable work with my CCTV recorder?
Yes, if the recorder has an HDMI output and the monitor or TV has an HDMI input. A 2 m cable suits a recorder in a cabinet below a monitor on a bracket or shelf. Connect it, choose the HDMI input on the screen and set the recorder's output resolution to one the screen supports.