
High Speed HDMI Cable 1.5 m
A 1.5 m High Speed HDMI cable is the everyday length for connecting a decoder, games console or computer to a TV or monitor close by. It reaches from a TV cabinet to a screen on its stand, or from a computer under the desk to a monitor on top, for homes and offices across Kenya.
- 1.5 m length for everyday TV and desk setups
- Sold as a High Speed HDMI cable
- Carries picture and sound in one cable
- Reaches from a lower shelf or floor to the screen
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 1.5m HDMI cable is the length most people need most often. It carries digital picture and sound from one device to one screen and reaches comfortably across a TV cabinet or from the floor to the top of a desk, without much spare cable to hide. This one is sold as a High Speed HDMI cable, the HDMI cable category above the older Standard type.
What 1.5 m reaches
- TV cabinets: a decoder, streaming box or console on a lower shelf to a TV standing on top of the cabinet.
- Office desks: a computer tower on the floor beside the desk to a monitor on the desk.
- CCTV desks: a DVR or NVR on a shelf under the desk to the monitor above it.
- Hotel rooms and lodgings: a set-top box tucked behind the TV stand.
As a rule of thumb, it suits a device up to about a metre and a bit from the screen's HDMI port, measured along the path the cable will follow.
Tips for a neat setup
Plan where the cable runs before you connect it. Bring it out of the back of the cabinet through the cable hole if there is one, keep it apart from the power leads where possible, and hold it in place with a clip or tie so it does not pull on the port when you open drawers or move the device.
- Fully seat each plug; a loose plug is a common cause of a blank screen.
- Avoid tight bends at the plug, especially behind a TV pushed close to the wall.
- Select the correct HDMI input on the TV after connecting.
Behind a wall-mounted TV
If the TV is on the wall and the device is in a cabinet below, measure the drop from the TV's port to the cabinet. Where it is longer than about a metre, a 2 m or 3 m cable is the safer choice.
What you need with it
- HDMI ports on both the device and the screen.
- A cable clip or tie for tidy routing.
- An HDMI switch if the TV has run out of HDMI inputs.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. You can collect from our shop in Nairobi CBD, have it delivered within Nairobi, or send it by courier anywhere in Kenya.
Frequently asked questions
What does High Speed mean on an HDMI cable?
High Speed is one of the official HDMI cable categories, introduced as the step up from the earlier Standard cables to carry higher-resolution signals. Newer categories, Premium High Speed and Ultra High Speed, exist for the most demanding signals on modern TVs and consoles. For most decoders, recorders and computers in everyday use, a High Speed cable is the type people choose.
Is 1.5 m enough to connect my PC to a monitor?
In most desk setups, yes. With the computer on the floor beside the desk and the monitor on top, the cable has to climb about 75 cm and cross part of the desk, which a 1.5 m cable covers with a little slack. If the computer sits at the far end of a long desk or across the room, measure first.
My TV shows no signal after connecting. What should I check?
First select the right HDMI input on the TV, as each port has its own number. Then make sure both plugs are pushed fully home and that the device is switched on. Try another HDMI port on the TV, and if possible test the cable with a different device. Restarting the device with the TV already on often helps.