SKU KCS-HDMI-SPLITTER-2

HDMI Splitter 2-Way (1 In, 2 Out)

KSh 1,500
In stock — pick up today in Nairobi CBD

A 2-way HDMI splitter takes one HDMI output and shows it on two screens. It is a simple fix for Kenyan homes and businesses that want their CCTV recorder on two monitors, such as the office and the gatehouse, or one decoder on two TVs, without buying a second device.

  • One HDMI source on two screens
  • Ideal for CCTV live view in two rooms
  • Same picture on both outputs
  • Works with recorders, decoders and computers
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

An HDMI splitter 2 way is one of the most useful small boxes in a CCTV installation. Most recorders have one HDMI output, but people often want live view in two places: on the monitor in the security office and on the TV in the manager's office, or in the gatehouse and inside the house. The splitter copies the recorder's HDMI output to two screens at once.

Common uses

  • CCTV in two places: the same camera view in the guard room and in the manager's office or main bedroom.
  • Home TV: one decoder showing on the sitting-room TV and a TV in another room.
  • Shops: a promotion or menu on two screens at different counters.
  • Teaching and training: a computer on a projector and a monitor for the presenter.

Points to understand before buying

  • Same picture on both: both screens show exactly what the source sends. You cannot watch different cameras or channels on each.
  • One direction only: the source goes into the input, and the screens go on the outputs.
  • It needs power: a splitter is an active box, so place it near a socket.
  • Resolution: if the two screens differ, the picture may be set to suit the weaker screen. For 4K sources and 4K TVs, choose a 4K-rated splitter.

Setting it up with a CCTV recorder

Place the splitter next to the recorder and connect the recorder's HDMI output to the splitter input with a short lead. Run an HDMI cable from each output to its screen. For a screen in a gatehouse or another building, use an HDMI extender on that output instead of a very long HDMI cable. Switch on the screens first, then restart the recorder so it detects the displays, and set its output resolution to one both screens support.

Recorder with two outputs?

Check the back of your recorder first. If it already has HDMI and VGA outputs, you may be able to drive a second monitor through VGA without a splitter.

What you need with it

  • Three HDMI cables: one short lead to the source and one to each screen.
  • An HDMI extender for any screen far away.
  • A UPS for the recorder, splitter and main screen.

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock.

Frequently asked questions

Can I watch different cameras on the two screens?

No. A splitter copies one picture, so both screens show the same layout from the recorder. If you change from a four-camera view to one camera, both screens change. To show different views on two screens, use a recorder with two independent outputs, or view the cameras on a phone or computer app in the second location.

One screen works but the other stays black. What should I check?

Swap the two output cables to see whether the fault follows the cable, the screen or the splitter port. Make sure the dark screen is on the correct HDMI input. Then restart the source with both screens switched on, and set the output resolution to one both screens can show. Copy protection on some decoders can also block one output.

How far can the second screen be from the splitter?

As far as the HDMI cable to it can reliably reach, which depends on the cable and the resolution. Screens in the same or next room are usually fine with an ordinary HDMI cable. For a gatehouse or a screen far down a corridor, connect an HDMI extender to that output and run network cable instead.

KSh 1,500 In stock