
HDMI Extender 30 m
A 30 m HDMI extender sends an HDMI picture from a source to a screen up to 30 metres away, using a transmitter and a receiver linked by cable. It suits offices, shops, churches and homes in Kenya where a screen is in the next room or across a hall, and pulling a long HDMI cable through conduit is impractical.
- Rated distance of 30 m
- Transmitter at the source, receiver at the screen
- Thin link cable pulls easily through conduit
- For next-room CCTV, decoder and PC displays
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
An HDMI extender 30m is the tidy way to put a screen somewhere the source cannot reach directly. The transmitter takes the HDMI output from your recorder, decoder or computer; the receiver gives HDMI out to the TV or projector; and a single cable between them carries the signal over a distance of up to 30 metres.
Typical jobs for 30 m
- A CCTV recorder in a back office showing on a TV at the shop counter or reception.
- A decoder in a cabinet feeding a TV across an open-plan office or restaurant.
- A laptop on a small church or training-room desk sending slides to a projector at the front.
- A screen in a waiting area fed from a PC in the next room.
Why choose an extender over a long HDMI cable
Extenders of this type usually link the two units with network cable, which is thin, flexible and easy to pull through conduit that is already in the wall. You cut it to the exact length and fit the plugs after pulling, so no oversized HDMI plug has to squeeze through the pipe. The extender is also built for the distance, so the picture has more margin than a passive HDMI cable stretched to its limit.
Installing it
- Measure the route and keep the total cable length between the units within 30 m, including patch leads.
- Use one continuous run of good solid-core cable with no joints.
- Terminate both ends in the same colour order and check them with a cable tester.
- Connect transmitter and receiver directly; do not pass the link through a network switch.
- Connect the source and screen with short HDMI leads, power the units and select the HDMI input on the screen.
If the picture is unstable
Re-test the link cable, re-terminate any doubtful plug, and try a lower output resolution at the source. Most faults come from the link cable rather than the extender itself.
What you need with it
- Network cable for the link, plugs, a crimping tool and a cable tester.
- Two short HDMI cables.
- Power sockets at the units that need power.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including the cable type it needs. We deliver within Nairobi and by courier across Kenya.
Frequently asked questions
Why use a 30 m extender instead of a 30 m HDMI cable?
An extender's link cable is thin and is terminated after it is pulled, so it passes easily through existing conduit and can be cut to the exact length. The extender is also designed for the distance, giving a steadier picture than a long passive HDMI cable at its limit. A long HDMI cable needs no power, but its large plug must be pulled through the pipe.
Can I use the network points already in my office?
Often, yes. If both rooms have wall points that run back to the same patch panel, connect those two points together at the panel with a patch lead, bypassing the network switch. The extender then sees one continuous cable. Count the wall runs and patch leads together, and keep the total within the 30 m rating.
Will it work with my CCTV recorder?
Yes, if the recorder has an HDMI output. Connect it to the transmitter with a short HDMI lead and the receiver to the reception TV or monitor. Set the recorder's output to a resolution the screen supports. Many shops in Nairobi use this setup to show the cameras at the counter while the recorder stays locked in the back office.