HDMI Cable 1.25 m
A 1.25 m HDMI cable is a short lead for devices that sit right beside or just below the screen: a decoder on the TV stand, a CCTV recorder next to its monitor, or a laptop beside a desk monitor. It keeps the setup tidy, with no extra metres coiled behind the TV, for homes and offices in Kenya.
- 1.25 m length for devices right beside the screen
- Carries picture and sound in one cable
- No spare cable to coil behind the TV
- For decoders, recorders, laptops and consoles
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 1.25m HDMI cable is for the shortest hop in your setup, where the device and the screen are practically neighbours. HDMI carries the digital picture and sound in one cable, and at this length there is just enough slack to connect comfortably without a bundle of spare cable hanging behind the TV or under the desk.
When 1.25 m is the right length
Measure the route the cable will actually follow, not the straight line. 1.25 m suits devices that sit within about a metre of the screen's HDMI port, for example:
- A decoder or streaming box on the same TV stand, just under the screen.
- A DVR or NVR on the desk beside its monitor, or on the same shelf in a guard booth.
- A laptop placed next to a desk monitor or a small TV.
- A games console on the shelf directly below a TV.
Why choose a short cable
A cable that is too long gets coiled and pushed behind furniture, where it collects dust, tangles with power leads and pulls on the HDMI ports when someone moves the device. A short lead keeps the connection direct, makes it easy to see which cable goes where, and gives a cleaner look on a TV stand or at a reception counter in a shop or office.
Not too short
The cable should reach without being tight. Leave a gentle curve at each plug, so the weight of the cable does not hang on the port. If the device is on a shelf below a wall-mounted TV, measure from the port on the back of the TV, down the wall and across to the device; that often needs a longer cable than people expect.
Connecting and looking after it
- Push each plug straight in until it is fully seated; a half-inserted plug causes flickering or no picture.
- Pull by the plug, never by the cable, when disconnecting.
- Avoid sharp bends right at the plug.
- Select the matching HDMI input on the TV or monitor after connecting.
What you need with it
- A device and a screen that both have HDMI ports.
- Cable ties or clips to keep it neat with the power leads.
- A longer HDMI cable if the device is more than about a metre away.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect from our shop in Nairobi CBD or order for delivery across Kenya.
Frequently asked questions
Is 1.25 m long enough for a wall-mounted TV?
Only if the device sits close below the TV, for example on a floating shelf directly under it. Measure from the HDMI port on the back of the TV, down the wall and across to the device's port, following the route the cable will take. If that is more than about a metre, choose a 2 m or 3 m cable instead.
Does a shorter HDMI cable give a better picture?
Over short distances like this, length is not what limits the picture. HDMI is digital, so a working cable either delivers the picture properly or shows obvious faults such as sparkles or drop-outs. The real benefit of a short cable is a tidier setup with less strain on the ports and less clutter behind the screen.
Can I use it to connect my CCTV recorder to a monitor?
Yes, if both the recorder and the monitor have HDMI ports and sit close together, such as on the same desk or shelf. Connect the recorder's HDMI output to the monitor's HDMI input and select that input on the monitor. If the monitor only has VGA, use a VGA cable or an HDMI to VGA adapter instead.