Fenus Arm-Type TV Wall Mount 40–85 inch FS 602P
The Fenus FS 602P is a heavy wall mount with an articulating arm for large flat-panel TVs from 40 to 85 inches. It fits VESA hole patterns from 200 × 200 up to 600 × 400 mm and holds up to 50 kg. It suits big living-room TVs, boardrooms, bars and halls in Kenya.
- Fits most 40–85 inch flat-panel TVs
- VESA 200 × 200 up to 600 × 400 mm
- Holds up to 50 kg
- Articulating arm brings the TV off the wall
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Fenus FS 602P is an arm-type 85 inch TV wall mount for large flat-panel screens from 40 to 85 inches. Instead of a flat plate, it uses an articulating arm, so the TV can be brought forward from the wall rather than sitting flat against it.
Key features
- Screen size: fits most 40–85 inch flat-panel TVs, as printed on the box.
- VESA patterns: 200 × 200, 200 × 400, 300 × 300, 400 × 400 and 600 × 400 mm.
- Load capacity: up to 110 lb (50 kg).
- Articulating arm design, as shown on the packaging.
- Universal fit for LED, LCD and plasma screens that use one of the listed VESA patterns.
Where to use it
An arm mount suits rooms where people watch from more than one place, such as an open-plan living and dining area, a boardroom, a sports bar, a church or school hall or a hotel lounge. Pulling the screen out from the wall also makes it easier to reach the ports at the back when you connect a decoder, a soundbar or a laptop.
Check before you buy
Measure the spacing of the four threaded holes on the back of your TV, side to side and top to bottom, in millimetres. If it matches one of the listed patterns and the TV weighs no more than 50 kg, this mount fits. Large TVs are heavy, so check the weight in the manual or on the label on the back. The arm's exact movement range is not printed on the box, so ask our team if you need a particular angle or distance from the wall.
Installation tips
- An arm puts more load on the wall than a flat bracket. Fix it only to solid masonry or a strong structural stud, with heavy-duty fixings.
- Use a spirit level so the TV hangs straight.
- Leave enough cable length for the arm to move without pulling plugs out.
- Have at least two people lift a large TV onto the mount.
For the exact screws and fixings supplied, ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi. You can collect the mount from the shop in Nairobi CBD, get delivery within Nairobi (up to 45 km), or order by courier anywhere in Kenya in 1–3 working days.
Frequently asked questions
Will the FS 602P fit my TV?
It fits most flat-panel TVs from 40 to 85 inches that use a VESA hole pattern of 200 × 200, 200 × 400, 300 × 300, 400 × 400 or 600 × 400 mm and weigh up to 50 kg. Measure the spacing of the four screw holes on the back of the TV, or check its manual, before you buy.
Can I move the TV after mounting?
Yes, the FS 602P has an articulating arm, so the screen can be brought forward from the wall and angled towards different parts of the room. The exact swivel, tilt and extension figures are not printed on the box, so if you need a specific range, ask our team at the Kefa CCTV Shop to check the unit.
Is my wall strong enough?
An arm mount carrying a large TV puts a lot of leverage on its fixings. Mount it only on solid masonry such as stone, brick or concrete block, or on a strong structural stud, using heavy-duty fixings. Do not hang it on partition board or hollow walls. If in doubt, have a qualified fitter check and install it.
Is it suitable for a 32 inch TV?
It is designed for 40–85 inch screens and its smallest listed VESA pattern is 200 × 200 mm. A small TV is usually better on a compact bracket such as the Fenus FS 20T or FS 40F, which suit 15–43 inch and 14–43 inch screens with smaller hole patterns. Ask our team which one fits your TV.