

Dahua 20-Channel 12V 60W CCTV Power Supply DH-PFM344D-20CH-BS
The Dahua DH-PFM344D-20CH-BS is a wall-mounted 20-channel switching power supply that powers many CCTV cameras from one mains socket. It gives 12 V DC with 60 W in total, has adjustable 13.5 V and 15 V modes for long cable runs, and includes surge and short-circuit protection for Kenyan installations.
- 20 outputs from one mains connection
- 12 V DC, 60 W total, 12 W per channel
- Adjustable to 13.5 V or 15 V for long cables
- Surge, over-current and short-circuit protection
- Wall mount, 100–240 V AC input
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Dahua 20 channel power supply DH-PFM344D-20CH-BS is a central switching power supply for CCTV systems. It feeds up to twenty 12 V DC outputs from one mains connection, so cameras can be powered from one tidy, wall-mounted unit next to the recorder instead of a separate adapter for each camera.
Key features
- 20 output channels on a terminal block.
- 60 W total output: 12 V at 5 A in normal mode, with up to 12 W on any one channel.
- Three output voltage levels: 12 V (normal), 13.5 V (long) and 15 V (extra-long), to make up for voltage drop on long camera cables.
- Wide input: 100–240 V AC, with a C8 socket and UK-style mains cable (1 m).
- Protection against over-current, over-voltage and short circuits.
- Surge protection: ±4 kV common mode, ±2 kV differential mode; static protection ±8 kV air, ±6 kV contact.
- Efficiency of 88% or more, idle draw of 0.21 W or less, V-0 flame-retardant housing.
Where to use it
Use it in homes, shops, offices and compounds where several analogue or 12 V cameras run back to one recorder location. Because the total output is 60 W, it suits systems of many low-power cameras rather than a few high-power ones. Typical fixed HD cameras draw a few watts each, but cameras with strong infrared or white lights, heaters or motors draw more, so add up the maximum power of every camera before connecting them.
Installation and setup
Mount the unit on a wall near the recorder in a dry, ventilated place; it is rated for 0 °C to +40 °C, so it belongs indoors or in a protected cabinet. Run a power pair from each output terminal to its camera, keeping polarity correct. On long runs where the picture flickers or infrared lights look weak, switch the output to 13.5 V or 15 V, but first check that each camera accepts that voltage. Plug the supply into a UPS so cameras stay on through power cuts.
What you need with it
- 12 V DC CCTV cameras within the 60 W total budget.
- Power cable (or the power pair in combined CCTV cable) and DC connectors.
- A UPS for power backup.
Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, get delivery within Nairobi (up to 45 km), or order courier delivery anywhere in Kenya in 1–3 working days.
Frequently asked questions
Can it power 20 cameras?
It has 20 outputs, but the total is 60 W (5 A at 12 V), with up to 12 W on any single channel. Twenty cameras only fit if their combined maximum draw stays under 60 W, which means low-power cameras of about 3 W each or less. Add up each camera's maximum power, including night lights, before connecting them all.
What are the 13.5 V and 15 V settings for?
Long thin power cables lose voltage, so a camera far from the supply may receive less than 12 V and show flicker, reboot or weak infrared at night. Raising the output to 13.5 V or 15 V compensates for that drop. Only use the higher settings when the camera end really is low, and check the camera accepts it.
Can it be installed outdoors?
No. Dahua rates it for an operating temperature of 0 °C to +40 °C and 10–90% humidity, and it is not described as waterproof. Mount it indoors near the recorder, or inside a ventilated, weatherproof cabinet. For a single camera far away outdoors, a waterproof adapter fitted at the camera is a better choice.
Will it work on Kenyan mains?
Yes. It accepts 100–240 V AC input, which covers Kenya's 240 V mains, and the BS model comes with a UK-standard mains cable that fits Kenyan sockets. Connect it through a UPS so the cameras keep running during power cuts, and protect the building wiring against surges.