

Dahua 12V 2A Outdoor Waterproof CCTV Power Adapter with Junction Box DH-PFM300
The Dahua DH-PFM300 is a 12 V DC, 2 A power adapter in a wall-mounted, waterproof housing that doubles as a small junction box. It powers a CCTV camera right at the camera position, outdoors or indoors, and accepts 180–264 V AC, so it runs on Kenyan 240 V mains.
- 12 V DC, 2 A output for CCTV cameras
- Accepts 180–264 V AC, suits Kenyan mains
- Waterproof wall-mount housing with junction space
- Over-current and over-voltage protection
- Works from –30 °C to +70 °C
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Dahua 12V 2A power supply DH-PFM300 is an outdoor CCTV power adapter built into a grey, wall-mounted, structurally waterproof housing. It converts mains power to a steady 12 V DC at up to 2 A, and the housing also works as a junction box, so camera connections or a video balun can sit inside it, protected from the weather.
Key features
- 12 V DC output at 2 A, regulated to ±5% voltage and ±2% current.
- Wide AC input: 180–264 V, 50/60 Hz, which covers Kenyan 240 V mains.
- Junction function: room for camera wiring, or a video balun for HDCVI, AHD, TVI or CVBS cameras.
- Wall mount, waterproof structure for outdoor camera positions.
- Protection against over-current and over-voltage, with a V0 fire-rated PC housing.
- Wide temperature range from –30 °C to +70 °C.
- 82% efficiency and under 0.5 W power use with no load.
Where to use it
Use it where a camera is far from the recorder or main power supply, such as a gate, a perimeter wall, a car park light pole or the far end of a warehouse. Powering the camera locally avoids running a long low-voltage cable, which can cause voltage drop and a weak or flickering picture at night when the infrared lights come on. It is equally useful indoors where a neat, enclosed power and wiring point is wanted.
Installation and setup
Mount the unit on a wall or pole near the camera, with the cable entries facing down. Connect the mains supply to the input terminal block; this should be done by a qualified electrician. Plug the 60 mm DC output lead (5.5 × 2.1 mm plug) into the camera's power connector, and place the camera's video connection or balun inside the housing before closing it. Check that the camera, or cameras, draw no more than 2 A in total at 12 V, including infrared or white lights.
What you need with it
- A 12 V DC CCTV camera drawing up to 2 A.
- A mains supply point near the camera.
- Coaxial cable with BNC connectors or a balun and network cable for the video signal.
Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, get delivery within Nairobi (up to 45 km), or order courier delivery anywhere in Kenya in 1–3 working days.
Frequently asked questions
Will it work on Kenyan mains power?
Yes. Dahua rates the DH-PFM300 for an AC input of 180–264 V at 50/60 Hz, and Kenyan mains is 240 V at 50 Hz, which falls inside that range. Its 12 V DC output is regulated, so the camera receives a steady voltage. Like any mains device, it is wise to protect it from surges with good wiring and earthing.
How many cameras can it power?
It supplies up to 2 A at 12 V. Add up the maximum current of every camera you plan to connect, including the extra draw of infrared or white lights at night, and keep the total within 2 A. Using one adapter per camera position also keeps each camera's power independent, so one fault does not affect the others.
Can it be mounted outdoors?
Yes. Dahua designed it for wall mounting with a structurally waterproof housing and an operating range of –30 °C to +70 °C. For the longest life, mount it with cable entries facing down, seal cable openings, and choose a spot sheltered from direct rain where possible, such as under eaves or on the side of a pole.
What is the junction function for?
The housing has space to hold camera wiring connections, or a video balun for HDCVI, AHD, TVI or CVBS cameras. That keeps the power plug, video connector and any balun together in one enclosed box near the camera, protected from weather and tampering, instead of loose connections taped to a wall.