
9-Channel CCTV Power Supply 12V 5A
A 9-channel CCTV power supply rated at 12 V DC and 5 A in total, with nine separate outputs. It is made for small to medium camera systems in Kenyan homes, shops and offices, typically an 8-camera kit with one spare channel, powered from a single unit beside the recorder.
- Nine separate 12 V DC outputs
- 5 A total output, about 60 W
- Pairs with 4 and 8-channel recorders
- One output per camera for easy fault finding
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
This 9 channel cctv power supply powers up to nine cameras from one unit at 12 V DC, with 5 A shared between all the outputs. It is the compact choice for home and small business systems, where you want each camera on its own output but do not need the capacity of a 20 A unit.
Understanding the 5 A rating
The 5 A is the total for the whole power supply, about 60 W, not the rating of each channel. If all nine outputs are in use, the average is just over half an amp per camera. Many fixed cameras draw less than that, but cameras with strong infrared or white-light illumination, and any motorised or heated cameras, can draw more. Read the current rating on each camera label, use the night-time figure, and make sure the total stays below 5 A with some spare. If it does not, choose the 18-channel 12 V 20 A unit instead.
- 12 V DC output, 5 A total.
- About 60 W across all outputs.
- Nine separate output channels.
- Sized for 4-camera and 8-camera systems.
Where to use it
It pairs naturally with a 4-channel or 8-channel DVR or NVR. Typical sites are a home with cameras around the gate, parking and doors, a shop with cameras over the counter and stock room, a small office, a pharmacy or a petrol station forecourt kiosk. The ninth output is handy for a later camera or a small 12 V device, as long as the total load allows it.
Installation and setup
Fix the unit indoors in a dry, ventilated place, ideally in the same cabinet as the recorder. Turn off the mains before connecting the input and earth as marked. Connect each camera to its own output, checking polarity, and label the cables so faults are easy to trace later. If the channels have fuses or indicator lights, check each one once powered. Kefa Solutions technicians can install CCTV systems.
What you need with it
- A 4-channel or 8-channel recorder and cameras.
- Power cable or combined video and power cable.
- DC jacks or pigtails for the camera ends.
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect in Nairobi CBD or order delivery.
Frequently asked questions
Can I connect nine cameras to a 9 channel 5A power supply?
Only if their combined current stays under 5 A. Shared across nine cameras, that is just over half an amp each on average. Check every camera label, using the figure with night illumination on. If the total is close to or above 5 A, use fewer cameras on this unit or choose a larger supply.
What is the difference between this and a single 12V 5A power supply?
Both provide 12 V at 5 A in total. This unit splits the output into nine separate channels, so each camera has its own connection and wiring stays tidy. A single 5 A supply has one output, and you would need to add a distribution block and fuses yourself.
Can I use it with an 8-channel DVR?
Yes, that is a typical pairing: eight outputs for the cameras and one spare. Note that the DVR itself usually has its own adapter, so it does not need to be powered from this unit. Keep the total camera load within 5 A.