SKU KCS-PSU-24V

24V Power Supply

KSh 2,500
In stock — pick up today in Nairobi CBD

A 24 V power supply for security and automation equipment that runs on 24 volts rather than the usual 12 V, such as some PTZ cameras, gate motors, barrier and access control equipment, and 24 V LED lighting. Buyers in Kenya should match the voltage type and current to the device before buying.

  • 24 V output for 24-volt security equipment
  • For PTZ cameras, gate and access equipment
  • Check AC or DC type before connecting
  • Size the current to the device label
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A 24v power supply is needed when a device is designed for 24 volts. Most small CCTV cameras run on 12 V, but a number of larger security and automation products use 24 V, and connecting them to a 12 V supply leaves them underpowered, while connecting a 12 V device to 24 V can destroy it.

Equipment that uses 24 V

  • Some PTZ (pan-tilt-zoom) cameras and camera heaters.
  • Some gate motors, barrier arms and door operators.
  • Some access control locks and controllers that accept 12 V or 24 V.
  • 24 V LED strips and signage.
  • Some wireless network equipment powered over a cable.

AC or DC: check before you buy

This is the most important point with 24 V equipment. Some devices, particularly certain PTZ cameras, are made for 24 V AC, while others need 24 V DC. The label or manual will say 24 VAC or 24 VDC, sometimes with a straight-line or wave symbol. A supply of the wrong type may not work, or may damage the device. Some devices accept either. Please ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock, including its output type and current rating.

Sizing the current

Voltage tells you whether a supply is compatible; current tells you whether it is big enough. Find the current or power on the device label. If only watts are given, divide by 24 to get amps; for example, a 48 W device draws 2 A at 24 V. Choose a supply rated above the total current of everything connected, with spare capacity, especially for motors and PTZ cameras, which draw more when they start moving.

Installation and setup

Keep the supply in a dry, ventilated place or a proper enclosure, away from rain and direct sun. Switch off the mains before wiring, connect earth where provided, and confirm the output with a multimeter before connecting the device. Label the cable clearly as 24 V, so nobody later connects a 12 V camera to it by mistake. Kefa Solutions technicians can install CCTV cameras, access control and electric fences.

Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order delivery within Nairobi or by courier across Kenya.

Frequently asked questions

Can I use a 24V power supply for a 12V CCTV camera?

No. A 12 V camera connected to 24 V receives double its rated voltage and is likely to be damaged straight away. Use a 12 V supply for 12 V cameras. Only use a 24 V supply where the device label states 24 V, or states a range that includes 24 V.

My PTZ camera says 24VAC. Will this power supply work?

Only if this unit gives a 24 V AC output. A PTZ camera made for 24 V AC may not work, or may be damaged, on 24 V DC, unless its label says it accepts both. Compare the output marking on the supply with the input marking on the camera before you connect anything.

How do I know how many amps I need at 24V?

Read the current or wattage on each device label. If only watts are shown, divide by 24 to get amps. Add the figures for everything on the supply and choose a supply with spare capacity above that total. Motors and PTZ cameras need extra margin, because they draw more power when starting.

KSh 2,500 In stock