

12V 30A Closed Switching Power Supply
A closed-case switching power supply rated at 12 V DC and 30 A, about 360 W. It is the high-capacity option for big CCTV installations in Kenya, such as 32-camera sites, large compounds and commercial premises, or for feeding several fused distribution boards and 12 V lighting from one central point.
- 12 V DC output at up to 30 A
- About 360 W total capacity
- For large multi-camera sites and 12 V lighting
- Feeds several fused distribution circuits
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
This 12v 30a power supply is a high-capacity closed-case switching unit. Thirty amps is far more than a home system needs; it is meant for sites where dozens of cameras, their night-time illumination and other 12 V equipment are all powered from one equipment room.
When a 30 A supply makes sense
Choose this size when the added-up current of everything on the 12 V side is above what a 20 A unit can carry with a margin. Typical jobs are a 32-camera system on a factory or warehouse, a large residential estate powered from a guard house, a hotel or hospital wing, or a site where cameras and 12 V security lighting share the same supply room. It can also feed two or three separate fused distribution boards, each serving one part of the site.
- 12 V DC output, up to 30 A.
- About 360 W in total (12 V multiplied by 30 A).
- Closed casing with screw terminals.
- Central supply for large CCTV and 12 V systems.
Wiring for high current
At 30 A, the wiring matters as much as the supply. Use output cable thick enough for the full current, fit crimped ring terminals or ferrules rather than twisted bare strands, and tighten every terminal screw firmly. A loose connection carrying high current heats up and can damage the terminal block. Divide the output into several fused circuits so no single camera cable is exposed to the full 30 A in the event of a short.
Installation and setup
Mount the supply in a dry, well-ventilated equipment cabinet or room, with clear space around it for heat to escape. Never install it outdoors. Switch off the mains, connect live, neutral and earth, and confirm any 110/220 V selector is on 220 V for Kenyan mains before switching on. Measure the output with a multimeter before connecting cameras.
Long cable runs lose voltage, and the effect grows with current. On large sites it is often better to place power near each group of cameras than to run everything from one room. Kefa Solutions technicians can install large CCTV systems.
What you need with it
- Fused distribution boards or CCTV power boxes.
- Heavy enough power cable, ring terminals or ferrules.
- A ventilated cabinet and a mains isolator.
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order delivery within Nairobi or by courier across Kenya.
Frequently asked questions
How many cameras can a 12V 30A power supply handle?
It depends on how much current each camera draws, especially at night when infrared or white lights are on. Add the ratings from each camera label and keep the total to roughly three-quarters of 30 A. For large sites, our team can help you work out the load before you buy.
Should I use one 30A supply or several smaller ones?
One large supply keeps everything in one place and is easy to maintain. Several smaller supplies placed near each group of cameras reduce voltage drop on long runs and mean one failure does not stop the whole site. On spread-out premises, smaller supplies near the cameras are often the better choice.
What cable should I use from a 30A power supply?
The cable from the supply to the distribution board must be rated for the full current it will carry, which is much thicker than normal camera power cable. After the distribution board, each fused circuit can use cable sized for that circuit's load and length. Ask an electrician or our team if unsure.